Ford Galaxy / Ford S-MAX. Manual — part 1094
13. Torque: 80 Nm
14. General Equipment:
Transmission jack
15.
WARNING:
This step requires
the aid of another
technician.
CAUTION:
Make sure that no
components catch.
NOTE: This step is
only necessary
when installing a
new component.
Remove the following
items:
1. Torque:
80 Nm
120°
2. Torque:
3. Torque:
150 Nm
90°
4. Torque:
Installation
150 Nm
90°
16.
WARNING:
This step
requires the aid
of another
technician.
CAUTION:
Make sure that
no components
catch.
Remove the
following items:
1. Torque:
Nm
2. Torque:
150 Nm
90°
3. Torque:
150 Nm
90°
1. To install reverse the removal procedure.
2. On both sides.
Special Tool(s):
205-316A
3. Refer to:
Front Toe Adjustment
(204-00 Suspension
System - General Information, General Procedures).
Uni-Body, Subframe and Mounting System
- Front Subframe Front Bushing
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
General Equipment
Removal
All vehicles
NOTE: Removal steps in this procedure may contain installation details.
204-598
Hydraulic Cylinder 10t
204-598-01
Remover/Installer, Subframe Bushing Guide
204-605
Separator, Lower Arm Ball Joint
204-607
Remover, Ball joint
204-609
Protection Cap, Ball Joint Gaiter
307-242
Remover, Transmission Fluid Cooler
308-440
Disconnect Tool, Hydraulic Line
Transmission jack
1.
CAUTION: Make sure that the steering
wheel lock is engaged.
NOTE: Make sure that the road wheels are in
the straight ahead position.
2. Torque: 30 Nm
3. Remove the wheel and tire on both sides.
Refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
4.
5.
6.
WARNING: Be prepared to collect
escaping fluids.
CAUTION: Make sure that all openings
are sealed.
Special Tool(s):
307-242
,
308-440
7.
CAUTION: Make sure that the ball joint
ball does not rotate.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст