Ford Bronco Sport (2022 year). Manual in english — page 7
Note:
Some options could appear slightly
different or not at all if the items are
optional.
Note:
Some MyKey menu options only
appear if MyKey is enabled and at least one
MyKey is programmed.
Select Screens
Select Screens
Menu options covered in Personalized Settings. See
Audio
Audio
Menu options covered in the SYNC chapter. See
Navigation
Navigation
Menu options covered in the SYNC chapter. See
Phone
Phone
Menu options covered in the SYNC chapter. See
Settings
Settings
Percent Oil Life Indication XXX%
Hold Ok to Reset
Oil Life
Hold Ok to Reset
Tire Monitor
Note:
Additional vehicle settings are
available through your touchscreen. See
105
Information Displays
Display Setup
Display Setup
Speedometer km/h
Speedometer MPH
Note:
Additional display settings are
available through your touchscreen. See
PERSONALIZED SETTINGS
Select one of these options to display on
your main screen.
Note:
Some options could appear slightly
different or not at all if the items are
optional.
Select Screens
Calm Screen
Fuel Economy
Trip 1
Trip 2
Tire Pressure
Intelligent 4WD
Off Road
Trailer Light Check
Seatbelts
Auto StartStop
Now Playing
After making your selection:
1.
Select a setting and press the
OK
button. This offers more information
on the feature.
2. Select fuel economy, trip 1 or trip 2 to
reset. Press and hold the
OK
button
for a few seconds.
Fuel Economy
An Instant Fuel Economy gauge is provided
along with average fuel economy. Average
fuel economy is continuously averaged
since the last reset.
106
Information Displays
Note:
When viewing this screen you can
reset your average fuel economy. Hold
OK
to reset fuel history and average fuel
economy.
Trip 1 and 2
Provides trip timer, trip average fuel
economy and total trip distance traveled.
For hybrid vehicles, the trip also shows the
distance traveled on electric power only.
INFORMATION MESSAGES
Depending on your vehicle options and
instrument cluster type, not all messages
display or are available.
Note:
The system abbreviates or shortens
certain messages.
E222314
Press the
OK
button to acknowledge and
remove some messages from the
information display. The system removes
other messages after a short time.
You need to confirm certain messages
before you can access the menus.
Adaptive Cruise Control
Details
Message
A radar malfunction is preventing the adaptive cruise from engaging.
Adaptive Cruise
Malfunction
Front Sensor Not
Aligned
Conditions exist such that the adaptive cruise cannot properly
function.
Adaptive Cruise
Not Available
Bad weather, ice, mud or water is causing poor radar visibility and
is blocking the radar sensor. You can typically clean the sensor to
resolve.
Adaptive Cruise
Not Available
Sensor Blocked
See Manual
Displays when automatic braking disables.
Normal Cruise
Active Adaptive
Braking Off
Displays when the adaptive cruise system reinstates control to the
driver.
Adaptive Cruise -
Driver Resume
Control
Displays when the vehicle speed is too slow to activate the adaptive
cruise.
Adaptive Cruise
Speed Too Low to
Activate
107
Information Displays
AdvanceTrac™ and Traction Control
Details
Message
The system detects a condition that requires service. Have the
system checked soon as possible.
Service Advan-
ceTrac
The status of the AdvanceTrac system after you switched it off.
AdvanceTrac Off
The status of the AdvanceTrac system after you switched it on.
AdvanceTrac On
The status of the traction control system after you switched it off.
Traction Control
Off
The status of the traction control system after you switched it on.
Traction Control
On
Alarm
Details
Message
Alarm triggered due to unauthorized entry. See
Vehicle Alarm To
Stop Alarm, Start
Vehicle.
Auto-Start-Stop
Details
Message
You need to restart the engine and press
the brake pedal to start.
Auto StartStop Press Brake to Start Engine
You need to restart the engine and press
the brake pedal harder to start.
Auto StartStop Press Brake Harder to
Activate
You need to restart the engine and press
any pedal to start.
Auto StartStop Press a Pedal to Start
Engine
Select neutral (N) for the system to restart
the engine.
Auto StartStop Select Neutral To Start
Engine
108
Information Displays
Details
Message
Select park (P) for the system to restart
the engine.
Auto StartStop Shift to P, then Restart
Engine
The system is not functioning. You need to
restart the engine.
Auto StartStop Manual Restart Required
Conditions are not met for the auto-start-
stop system to properly function.
Auto StartStop Not Available
Battery and Charging System
Details
Message
The charging system needs servicing. If the
warning stays on or continues to come on, have
the system checked as soon as possible.
Check Charging System
The charging system needs servicing. If the
warning stays on or continues to come on, have
the system checked as soon as possible.
Charging System Service Soon
The charging system needs servicing. Have the
system checked as soon as possible.
Charging System Service Now
The battery management system determines
that the 12V battery is at a low state of charge.
Start the engine to charge the battery or charge
the battery using an aftermarket battery
charger. This message clears once you restart
your vehicle and the battery state of charge
recovers.
Battery State of Charge Low
The battery management system determines
that the battery is at a low state of charge.
Switch the ignition off as soon as possible to
protect the battery. This message clears once
you restart your vehicle and the battery state
of charge recovers. Turning off unnecessary
electrical loads allows for a faster battery
state-of-charge recovery.
Turn Power Off To Save Battery
109
Information Displays
Blind Spot Information and Cross Traffic Alert System
Details
Message
A system error has occurred. Have the system checked as soon as
possible.
Blind Spot System
Fault
The system sensors are blocked. See
Blind Spot Not
Available Sensor
Blocked See
Manual
The system detects a vehicle and automatically applied the brakes.
Cross Traffic Alert
Applying Brakes
The blind spot information system and cross traffic alert system
sensors are blocked. See
Cross Traffic Not
Available Sensor
Blocked See
Manual
A system error has occurred. Have the system checked as soon as
possible.
Cross Traffic
System Fault
The system automatically turns off and displays this message when
you connect a trailer to the vehicle that does not have a trailer blind
spot system or when you switch the trailer blind spot system off
through the information display. See
Cross Traffic Alert
Deactivated Trailer
Attached
The system automatically turns off and displays this message when
you connect a trailer to the vehicle that does not have a trailer blind
spot system or when you switch the trailer blind spot system off
through the information display. See
Blind Spot Alert
Deactivated Trailer
Attached
Doors and Locks
Details
Message
The driver door is not completely closed.
Driver Door Ajar
The passenger door is not completely closed.
Passenger Door
Ajar
The rear left door is not completely closed.
Rear Left Door Ajar
The rear right door is not completely closed.
Rear Right Door
Ajar
110
Information Displays
Details
Message
The liftgate or liftgate glass is not completely closed.
Liftgate or liftglass
ajar
The hood is not completely closed.
Hood Ajar
The factory keypad code appears in the information display after
the system resets the keypad. See
Factory Keypad
Code {X X X X X}
Driver Alert
Details
Message
Stop and rest as soon as it is safe to do so.
Driver Alert
Warning Rest Now
Take a rest soon.
Driver Alert
Warning Rest
Suggested
Four-Wheel Drive
Details
Message
The four-wheel drive system temporarily turns off to protect itself
from overheating.
4WD Temporarily
Disabled
The four-wheel drive system is locking up the torque transfer clutch
to help reduce clutch temperature.
4WD Temporarily
Locked
The four-wheel drive system temporarily turns off to protect itself
from overheating or if you are using the temporary spare tire.
4WD Off
The four-wheel drive system will resume normal function and clear
this message after driving a short distance with the road tire re-
installed or after the system cools.
4WD Restored
The four-wheel drive system is not properly operating. If the warning
stays on or continues to come on, have the system checked as soon
as possible.
4WD Fault Service
Required
Displays when the power transfer unit fluid requires service.
Change 4WD
Power Transfer
Unit Lube
111
Information Displays
Details
Message
Displays when you have the power transfer unit fluid changed and
reset to new.
4WD Power
Transfer Unit Lube
Set to New
The selected drive mode does not allow you to turn on the rear
differential lock feature.
Rear Differential
Lock Not Available
in Current Drive
Mode
The selected drive mode requires your vehicle to be in four-wheel
drive.
4WD Lock
Required in Current
Drive Mode
Fuel
Details
Message
An early reminder of a low fuel condition.
Fuel Level Low
The fuel fill inlet may not be properly closed.
Check Fuel Fill
Inlet
Wait for up to 15 seconds while the fuel system depressurizes.
Fuel Door Opening
The fuel system has finished depressurizing and you can begin to
refuel.
Fuel Door Open
A reminder to close the fuel door. Failure to follow this instruction
can cause the check engine light to illuminate.
Close Fuel Door to
Avoid ""Check
Engine"" Light
There is an error in attempting to refill your vehicle.
Refuel Error See
Manual
Hill Start Assist
Details
Message
Hill start assist is not available. Have the system checked as soon
as possible. See
Hill Start Assist
Not Available
112
Information Displays
Keys and Intelligent Access
Details
Message
A reminder to press the brake when starting your vehicle.
To START Press
Brake
The system does not detect the key. See
No Key Detected
Appears when you need to press the Start Stop button to shut off
the engine when the system does not detect an Intelligent Access
key inside your vehicle.
Restart Now or
Key is Needed
Your vehicle is in the accessory ignition state.
Full Accessory
Power Active
There is a problem with your vehicle’s starting system. Have the
system checked as soon as possible.
Starting System
Fault
During spare key programming, an intelligent access key is
programmed to the system.
Key Program
Successful
During spare key programming, the maximum number of keys have
been programmed.
Max Number of
Keys Learned
Displayed during spare key programming, when an intelligent access
key has failed to be programmed.
Key Program
Failure
Displayed during spare key programming when not enough keys
have been programmed.
Not Enough Keys
Learned
Displays when the key battery is low. Change the battery as soon
as possible.
Key Battery Low
Replace Soon
Displays when the vehicle is switched off.
Vehicle Switched
Off
113
Information Displays
Lane Keeping System
Details
Message
The system has malfunctioned. Have the system checked as soon
as possible.
Lane Keeping Sys.
Malfunction
Service Required
The system has detected a condition that has caused the system
to be temporarily unavailable.
Front Camera
Temporarily Not
Available
The system has detected a condition that requires the windshield
to be cleaned to properly operate.
Front Camera Low
Visibility Clean
Screen
The system has malfunctioned. Have the system checked as soon
as possible.
Front Camera
Malfunction
Service Required
The system requests the driver to keep their hands on the steering
wheel.
Keep Hands on
Steering Wheel
Maintenance
Details
Message
Stop your vehicle as soon as safely possible, turn off the engine.
Check the oil level. If the warning stays on or continues to come on
with your engine running, Have the system checked as soon as
possible.
Low Engine Oil
Pressure
The engine oil life remaining is 10% or less.
Change Engine Oil
Soon
The oil life left reaches 0%.
Oil Change
Required
The brake fluid level is low and the brake system should be imme-
diately inspected. See
Brake Fluid Level
Low
The brake system needs servicing. Stop the vehicle in a safe place.
Have the system checked as soon as possible.
Check Brake
System
The engine coolant temperature is excessively high.
Engine Coolant
Over Temperature
The washer fluid is low and needs to be refilled.
Washer Fluid Level
Low
114
Information Displays
Details
Message
Indicates that your vehicle is still in Transport mode. This may not
allow some features to properly operate. Have the system checked
as soon as possible.
Transport Mode
Contact Dealer
Indicates that your vehicle is still in Factory mode. This may not
allow some features to properly operate. Have your vehicle checked
as soon as possible.
Factory Mode
Contact Dealer
Informs the driver that the powertrain needs service due to a
powertrain malfunction.
See Manual
The engine has reduced power to help reduce high engine temper-
ature.
Power Reduced to
Lower Engine
Temp
The brake system has reduced stopping power.
Brake Applied
Power Reduced
MyKey
Details
Message
You cannot program a MyKey.
MyKey not Created
MyKey is active.
MyKey Active Drive
Safely
When switching on your vehicle and MyKey is in use, displays that
the MyKey speed limit is on.
Speed Limited to
XX MPH/km/h
MyKey is in use and the MyKey speed limit is on and the vehicle
speed is approaching 81 mph (130 km/h).
Near Vehicle Top
Speed
You have reached the speed limit set for your MyKey.
Vehicle at Top
Speed of MyKey
Setting
You have an active MyKey with a programmed set speed limit.
Check Speed Drive
Safely
Belt-Minder turns on with a MyKey in use.
Buckle Up to
Unmute Audio
With a MyKey in use, AdvanceTrac turns on.
AdvanceTrac On -
MyKey Setting
115
Information Displays
Details
Message
With a MyKey in use, traction control turns on.
Traction Control
On - MyKey
Setting
With a MyKey in use, park aid is always on.
MyKey Park Aid
Cannot be Deactiv-
ated
With a MyKey in use, lane keeping alert turns on.
Lane Keeping Alert
On MyKey Setting
Park Aid
Details
Message
The system has detected a fault that requires service. Have the
system checked as soon as possible.
Check Rear Park
Aid
The radar is blocked due to bad weather, ice, mud or water in front
of radar. You can typically clean the sensor to resolve. See
Rear Park Aid Not
Available Sensor
Blocked See
Manual
The radar is blocked due to bad weather, ice, mud or water in front
of radar. You can typically clean the sensor to resolve. See
Park Aid Not Avail-
able Sensor
Blocked See
Manual
Displays the park aid status.
Rear Park Aid On
Off
Park Brake
Details
Message
The parking brake is set, the engine is running and you drive your
vehicle more than 3 mph (5 km/h). If the warning stays on after the
parking brake is released, Have the system checked as soon as
possible.
Park Brake
Engaged
The electric parking brake is set and a manual release is attempted
without the brake pedal being pressed.
To Release: Press
Brake and Switch
The electric parking brake is set and an automatic release is
attempted but cannot be performed. Perform a manual release.
Park Brake Use
Switch to Release
116
Information Displays
Details
Message
The electric parking brake is set and your vehicle speed exceeds
3 mph (5 km/h). Release park brake before continued driving.
Release Park
Brake
The electric parking brake is not fully applied.
Park Brake Not
Applied
The electric parking brake is not fully released.
Park Brake Not
Released
The electric parking brake system has been put into a special mode
that is used to allow service of the rear brakes. Have the system
checked as soon as possible.
Park Brake Main-
tenance Mode
The electric park brake system has detected a condition that
requires service. Some functionality may still be available. Have the
system checked as soon as possible.
Park Brake Limited
Function Service
Required
The electric parking brake system has detected a condition that
requires service. Have the system checked as soon as possible.
Park Brake
Malfunction
Service Now
Numerous park brake applies have overheated the system. Wait 2
minutes before attempting to apply again.
Park Brake System
Overheated
Power Steering
Details
Message
The power steering system has detected a condition that requires
service. Have the system checked as soon as possible.
Steering Fault
Service Now
The power steering system is not working. Stop your vehicle in a
safe place. Have the system checked as soon as possible.
Steering Loss Stop
Safely
The power steering system has detected a condition within the
power steering system or passive entry or passive start system
requires service. Have the system checked as soon as possible.
Steering Assist
Fault Service
Required
The steering lock system has detected a condition that requires
service. Have the system checked as soon as possible.
Steering Lock
Malfunction
Service Now
117
Information Displays
Pre-Collision Assist
Details
Message
You have a blocked sensor due to bad weather, ice, mud or water
in front of the radar sensor. You can typically clean the sensor to
resolve.
Pre-Collision
Assist Not Avail-
able Sensor
Blocked
A fault with the system has occurred. Have the system checked as
soon as possible.
Pre-Collision
Assist Not Avail-
able
Remote Start
Details
Message
Displays as a reminder to apply the brake and push the gear shift
button to drive the vehicle after a remote start.
To Drive: Press
Brake and Gear
Shift Button
Seats
Details
Message
Objects are by the passenger seat. After the objects are moved
away from the seat, if the warning stays on or continues to come
on have the system checked as soon as possible.
Occupant Sensor
BLOCKED Remove
Objects Near
Passenger Seat
Displays as a reminder that memory seats are not available when
driving.
Memory Recall Not
Permitted While
Driving
Displays to show where your memory setting has been saved.
Memory {0} Saved
118
Information Displays
Starting System
Details
Message
Displays when starting the vehicle as a reminder to apply the brake.
To START Press
Brake
Displays when the starter has exceeded its cranking time in
attempting to start the vehicle.
Cranking Time
Exceeded
Displays when the starter is attempting to start the vehicle.
Engine Start
Pending Please
Wait
Displays when the pending start has been cancelled.
Pending Start
Cancelled
Tire Pressure Monitoring System
Details
Message
One or more tires on your vehicle have low tire pressure. See
Tire Pressure Low
The tire pressure monitoring system is malfunctioning. If the warning
stays on or continues to come on, have the system checked as soon
as possible. See
Tire Pressure Monitoring System
Tire Pressure
Monitor Fault
A tire pressure sensor is malfunctioning, or your spare tire is in use.
For more information on how the system operates under these
conditions, See
Tire Pressure Monitoring System
the warning stays on or continues to come on, have the system
checked as soon as possible.
Tire Pressure
Sensor Fault
119
Information Displays
Trailer
Details
Message
A correct trailer connection is sensed during
a given ignition cycle.
Trailer Connected
A trailer connection becomes either inten-
tionally or unintentionally disconnected and
has been sensed during a given ignition
cycle.
Trailer Disconnected
The trailer sway control has detected trailer
sway.
Trailer Sway Reduce Speed
There are certain faults in your vehicle
wiring and trailer wiring/brake system. See
Trailer Wiring Fault
There is a fault with your trailer turn lamp.
Check your lamp.
Trailer Left Turn Lamps Fault Check Lamps
There is a fault with your trailer turn lamp.
Check your lamp.
Trailer Right Turn Lamps Fault Check
Lamps
There is a fault with your trailer battery.
Trailer Battery Not Charging See Manual
There is a fault with your vehicle trailer
lighting module. See
Trailer Lighting Module Fault See Manual
Transmission
Details
Message
Displays when you switch the engine off and the transmission is
not in park (P). Shift into park (P).
Shift to Park
Transmission is too cold. Wait for it to warm up before you drive.
Transmission
Warming Up
Please Wait
Displays when the brake pedal needs to be depressed.
Press Brake Pedal
The transmission is overheating and needs to cool. Stop in a safe
place as soon as it’s possible.
Transmission Over
Temperature Stop
Safely
120
Information Displays
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст