Ford Explorer (2022 year). Manual in english — page 8
Active Park
Action
Message
The system requires service. Have the system checked as soon as
possible.
Active Park Fault
Adaptive Cruise Control
Action
Message
A radar concern is preventing the adaptive cruise from engaging.
How Does Adaptive Cruise Control With Stop and Go Work
Adaptive Cruise
Malfunction
Front Sensor Not
Aligned
Conditions exist such that the adaptive cruise cannot function
properly. See
How Does Adaptive Cruise Control With Stop
Adaptive Cruise
Not Available
The radar is blocked because of poor radar visibility due to inclement
weather, ice, mud or water in front of radar. You can typically clean
the sensor to resolve. See
How Does Adaptive Cruise Control
Adaptive Cruise
Not Available
Sensor Blocked
See Manual
Displays when the system disables automatic braking.
Normal Cruise
Active Adaptive
Braking Off
Displays when the system reinstates adaptive cruise control to you.
Adaptive Cruise -
Driver Resume
Control
Displays when the vehicle speed is too slow to activate the adaptive
cruise.
Adaptive Cruise
Speed Too Low to
Activate
Adaptive Headlamps
Action
Message
Displays when the system detects a concern. Have the system
checked as soon as possible.
Check Headlamp
System See
Manual
121
Information Displays
AdvanceTrac™ and Traction Control
Action
Message
The system detects a condition that requires service. Have the
system checked as soon as possible.
Service Advan-
ceTrac
The status of the AdvanceTrac system after you switch it off.
AdvanceTrac Off
The status of the AdvanceTrac system after you switch it on.
AdvanceTrac On
The system is off while the vehicle is in 4x4 low.
AdvanceTrac OFF
in 4x4 LOW
The status of the AdvanceTrac sport mode after you switch it on.
AdvanceTrac
SPORT MODE
The status of the traction control system after you switch it off.
Traction Control
Off
The status of the traction control system after you switch it on.
Traction Control
On
Alarm
Action
Message
Alarm triggered due to unauthorized entry. See
Vehicle Alarm To
Stop Alarm, Start
Vehicle.
Battery and Charging System (12 volt)
Action
Message
The charging system needs servicing. If the warning stays on or
continues to come on, have the system checked as soon as possible.
Check Charging
System
The charging system needs servicing. If the warning stays on or
continues to come on have the system checked as soon as possible.
Charging System
Service Soon
The charging system needs servicing. Have the system checked as
soon as possible.
Charging System
Service Now
122
Information Displays
Action
Message
The battery management system determines that the 12V battery
is at a low state of charge. Start the engine to charge the battery
or charge the battery using an aftermarket battery charger. This
message clears once you restart your vehicle and the battery state
of charge has recovered.
Battery State of
Charge Low
The battery management system determines that the battery is at
a low state of charge. Turn the ignition off as soon as possible to
protect the battery. This message will clear once the vehicle has
been started and the battery state of charge has recovered. Turning
off unnecessary electrical loads will allow faster battery state-of-
charge recovery.
Turn Power Off To
Save Battery
Displays when the battery management system detects an
extended low-voltage condition. Various vehicle features will be
disabled to help preserve the battery. Turn off as many of the
electrical loads as soon as possible to improve system voltage. If
the system voltage has recovered, the disabled features will operate
again as normal.
Low Battery
Features Tempor-
arily Turned Off
Battery and Charging System (High Voltage)
Action
Message
Displays when the stop safety hazard warning lamp is illuminated.
This indicates an electrical component that requires service. This
causes the vehicle to shut down or enter into limited operating
mode.
Stop Safely Now
Blind Spot Information and Cross Traffic Alert System
Action
Message
A system error has occurred. Have the system checked as soon as
possible.
Blind Spot System
Fault
The system sensors are blocked. See
Blind Spot Not
Available Sensor
Blocked See
Manual
The system detects a vehicle and automatically applied the brakes.
Cross Traffic Alert
Applying Brakes
123
Information Displays
Action
Message
The blind spot information system and cross traffic alert system
sensors are blocked. See
Cross Traffic Not
Available Sensor
Blocked See
Manual
A system error has occurred. Have the system checked as soon as
possible.
Cross Traffic
System Fault
The system automatically turns off and displays this message when
you connect a trailer to the vehicle that does not have a trailer blind
spot system or when you switch the trailer blind spot system off
through the information display. See
Cross Traffic Alert
Deactivated Trailer
Attached
The system automatically turns off and displays this message when
you connect a trailer to the vehicle that does not have a trailer blind
spot system or when you switch the trailer blind spot system off
through the information display. See
Blind Spot Alert
Deactivated Trailer
Attached
Doors and Locks
Action
Message
The driver door is not completely closed.
Driver Door Ajar
The passenger door is not completely closed.
Passenger Door
Ajar
The rear left door is not completely closed.
Rear Left Door Ajar
The rear right door is not completely closed.
Rear Right Door
Ajar
The liftgate is not completely closed.
Liftgate Ajar
The hood is not completely closed.
Hood Ajar
The system has disabled the door switches.
Switches Inhibited
Security Mode
Displays when the door lock is turned on and you attempt to open
the door.
Doors Locked
Unlock Before
Opening
124
Information Displays
Action
Message
Indicates a driver door fault that requires manually opening the
door by the override lever. Have the system checked as soon as
possible.
Driver Door Fault
Use Inside Over-
ride Lever In Map
Indicates a fault with the electronic door system. Have the system
checked as soon as possible.
Door Fault Service
Required
There is a system malfunction with the child locks. Have the system
checked as soon as possible.
Child Lock
Malfunction
Service Required
Indicates that the rear seat interior door release switches and power
windows are switched off, preventing rear seat occupants from
opening the doors or windows.
Child Lock ON
Indicates that the rear seat interior door release switches and power
windows are switched on, allowing the rear seat occupants to open
the doors and windows.
Child Lock OFF
The factory keypad code displays in the information display after
the system resets the keypad. See
Factory Keypad
Code {X X X X X}
Driver Alert
Action
Message
Stop and rest as soon as it is safe to do so.
Driver Alert
Warning Rest Now
Take a rest soon.
Driver Alert
Warning Rest
Suggested
Fuel
Action
Message
An early reminder of a low fuel condition.
Fuel Level Low
The fuel fill inlet may not be properly closed.
Check Fuel Fill
Inlet
Wait for up to 15 seconds while the fuel system depressurizes.
Fuel Door Opening
125
Information Displays
Action
Message
The fuel system has finished depressurizing and you can begin to
refuel.
Fuel Door Open
A reminder to close the fuel door. Failure to follow this instruction
can cause the check engine light to illuminate.
Close Fuel Door to
Avoid ""Check
Engine"" Light
There is an error in attempting to refill your vehicle.
Refuel Error See
Manual
Hill Descent Control
Action
Message
Displays when you deactivate hill descent control mode.
Hill Descent
Control OFF
Displays when hill descent speed exceeds 20 mph (32 km/h).
For Hill Descent
Reduce Speed 20
MPH or Less
Displays when hill descent speed exceeds 20 mph (32 km/h).
For Hill Descent
Reduce Speed 32
Km/h or Less
Displays when hill descent control mode requires you to shift the
transmission into gear.
For Hill Descent
Select Gear
Displays when the hill control mode requires you to resume control.
Hill Descent Driver
Resume Control
Displays when a hill descent system fault is present.
Hill Descent
Control Fault
Displays when you disable the hill descent control mode to cool
the brake system.
Hill Descent
Control Off
System Cooling
Displays when hill descent control mode is ready.
Hill Descent
Control Ready
Displays when you activate the hill descent control mode.
Hill Descent
Control Active
126
Information Displays
Hill Start Assist
Action
Message
Hill start assist is not available. Have the system checked as soon
as possible. See
Hill Start Assist
Not Available
Keys and Intelligent Access
Action
Message
A reminder to press the brake while starting your vehicle.
To START Press
Brake
The key is not detected by the system.
No Key Detected
The Start Stop button is pressed to shut off the engine and an
Intelligent Access key is not detected inside your vehicle.
Restart Now or
Key is Needed
Your vehicle is in the accessory ignition state.
Full Accessory
Power Active
There is a problem with your vehicle’s starting system. Have the
system checked as soon as possible.
Starting System
Fault
During spare key programming, an intelligent access key is
programmed to the system.
Key Program
Successful
During spare key programming, the maximum number of keys have
been programmed.
Max Number of
Keys Learned
Displays during spare key programming, when intelligent access
key programming fails.
Key Program
Failure
Displays during spare key programming when you have not
programmed enough keys.
Not Enough Keys
Learned
Displays when the key battery is low. Change the battery as soon
as possible.
Key Battery Low
Replace Soon
Displays when you switch the vehicle off.
Vehicle Switched
Off
Informs you that upon exiting your vehicle that the vehicle is still
on.
Vehicle is ON
127
Information Displays
Lane Keeping System
Action
Message
The system has malfunctioned. Have the system checked as soon
as possible.
Lane Keeping Sys.
Malfunction
Service Required
The system has detected a condition that has caused the system
to be temporarily unavailable.
Front Camera
Temporarily Not
Available
The system has detected a condition that requires the windshield
to be cleaned to operate properly.
Front Camera Low
Visibility Clean
Screen
The system has malfunctioned. Have the system checked as soon
as possible.
Front Camera
Malfunction
Service Required
The system requests the driver to keep their hands on the steering
wheel.
Keep Hands on
Steering Wheel
Maintenance
Action
Message
Stop your vehicle as soon as safely possible and turn off the engine.
Check the oil level. If the warning stays on or continues to come on
with your engine running, have the system checked as soon as
possible.
Low Engine Oil
Pressure
The engine oil life is low and needs to be changed soon.
Change Engine Oil
Soon
The engine oil life is low and needs to be changed immediately.
Oil Change
Required
The brake fluid level is low and the brake system should be
inspected immediately. See
Brake Fluid Level
Low
The brake system needs servicing. Stop the vehicle in a safe place.
Contact an authorized dealer.
Check Brake
System
The engine coolant temperature is excessively high.
Engine Coolant
Over Temperature
The washer fluid is low and needs to be refilled.
Washer Fluid Level
Low
128
Information Displays
Action
Message
Indicates that your vehicle is still in Transport mode. This may not
allow some features to operate properly. Have the system checked
as soon as possible.
Transport Mode
Contact Dealer
Indicates that your vehicle is still in Factory mode. This may not
allow some features to operate properly. Have the system checked
as soon as possible.
Factory Mode
Contact Dealer
Informs the driver that the powertrain needs service due to a
powertrain malfunction.
See Manual
The engine has reduced power to help reduce high engine temper-
ature.
Power Reduced to
Lower Engine
Temp
The brake system has reduced stopping power.
Brake Applied
Power Reduced
MyKey
Action
Message
You cannot program a MyKey.
MyKey not Created
MyKey is active.
MyKey Active Drive
Safely
When switching on your vehicle and MyKey is in use, displays that
the MyKey speed limit is on.
Speed Limited to
{avg speed XXXX}
km/h
MyKey is in use and the MyKey speed limit is on and the vehicle
speed is approaching 81 mph (130 km/h).
Near Vehicle Top
Speed
You have reached the speed limit set for your MyKey.
Vehicle at Top
Speed of MyKey
Setting
You have an active MyKey with a programmed set speed limit.
Check Speed Drive
Safely
Belt-Minder turns on with a MyKey in use.
Buckle Up to
Unmute Audio
With a MyKey in use, AdvanceTrac turns on.
AdvanceTrac On -
MyKey Setting
129
Information Displays
Action
Message
With a MyKey in use, traction control turns on.
Traction Control
On - MyKey
Setting
With a MyKey in use, park aid is always on.
MyKey Park Aid
Cannot be Deactiv-
ated
With a MyKey in use, lane keeping alert turns on.
Lane Keeping Alert
On MyKey Setting
Park Aid
Action
Message
The system detects a fault that requires service. Have your vehicle
checked as soon as possible.
Check Front Park
Aid
The system detects a fault that requires service. Have your vehicle
checked as soon as possible.
Check Rear Park
Aid
The radar is blocked due to bad weather, ice, mud or water in front
of radar. You can typically clean the sensor to resolve. See
Rear Park Aid Not
Available Sensor
Blocked See
Manual
The radar is blocked due to bad weather, ice, mud or water in front
of radar. You can typically clean the sensor to resolve. See
Front Park Aid Not
Available Sensor
Blocked See
Manual
The radar is blocked due to bad weather, ice, mud or water in front
of radar. You can typically clean the sensor to resolve. See
Park Aid Not Avail-
able Sensor
Blocked See
Manual
Displays the park aid status.
Front Park Aid On
Off
Displays the park aid status.
Rear Park Aid On
Off
130
Information Displays
Park Brake
Action
Message
The parking brake is set, the engine is running and you drive your
vehicle more than 3 mph (5 km/h). If the warning stays on after the
parking brake is released, contact an authorized dealer as soon as
possible.
Park Brake
Engaged
The electric parking brake is set and a manual release is attempted
without the brake pedal being pressed.
To Release: Press
Brake and Switch
The electric parking brake is set and an automatic release is
attempted but cannot be performed. Perform a manual release.
Park Brake Use
Switch to Release
The electric parking brake is set and your vehicle speed exceeds
3 mph (5 km/h). Release park brake before continued driving.
Release Park
Brake
The electric parking brake is not fully applied.
Park Brake Not
Applied
The electric parking brake is not fully released.
Park Brake Not
Released
The electric parking brake system has been put into a special mode
that is used to allow service of the rear brakes. Have the system
checked as soon as possible.
Park Brake Main-
tenance Mode
The electric park brake system has detected a condition that
requires service. Some functionality may still be available. Have the
system checked as soon as possible.
Park Brake Limited
Function Service
Required
The electric parking brake system has detected a condition that
requires service. Have the system checked as soon as possible.
Park Brake
Malfunction
Service Now
Numerous park brake applies have overheated the system. Wait 2
minutes before attempting to apply again.
Park Brake System
Overheated
131
Information Displays
Power Steering
Action
Message
The power steering system has detected a condition that requires
service. Have the system checked as soon as possible.
Steering Fault
Service Now
The power steering system is not working. Stop your vehicle in a
safe place. Have the system checked as soon as possible.
Steering Loss Stop
Safely
The power steering system has detected a condition within the
power steering system or passive entry or passive start system that
requires service. Have the system checked as soon as possible.
Steering Assist
Fault Service
Required
The steering lock system has detected a condition that requires
service. Have the system checked as soon as possible.
Steering Lock
Malfunction
Service Now
Pre-Collision Assist
Action
Message
You have a blocked sensor due to inclement weather, ice, mud or
water in front of the radar sensor. You can typically clean the sensor
to resolve.
Pre-Collision
Assist Not Avail-
able Sensor
Blocked
A fault with the system has occurred. Have the system checked as
soon as possible.
Pre-Collision
Assist Not Avail-
able
Remote Start
Action
Message
Displays as a reminder to apply the brake and push the gear shift
button to drive the vehicle after a remote start.
To Drive: Press
Brake and Gear
Shift Button
132
Information Displays
Seats
Action
Message
Objects are by the passenger seat. After the objects are moved
away from the seat, if the warning stays on or continues to come
on have the system checked as soon as possible.
Occupant Sensor
BLOCKED Remove
Objects Near
Passenger Seat
Displays as a reminder that memory seats are not available while
driving.
Memory Recall Not
Permitted While
Driving
Displays to show where your memory setting has been saved.
Memory X Saved
Starting System
Action
Message
Displays when starting the vehicle as a reminder to apply the brake.
To START Press
Brake
Displays when the starter has exceeded its cranking time in
attempting to start the vehicle.
Cranking Time
Exceeded
Displays when the starter is attempting to start the vehicle.
Engine Start
Pending Please
Wait
Displays when the pending start has been cancelled.
Pending Start
Cancelled
133
Information Displays
Tire Pressure Monitoring System
Action
Message
One or more tires on your vehicle have low tire pressure. See
Tire Pressure Low
The tire pressure monitoring system is malfunctioning. If the warning
stays on or continues to come on, have the system checked as soon
as possible. See
Tire Pressure Monitoring System
Tire Pressure
Monitor Fault
A tire pressure sensor is malfunctioning, or your spare tire is in use.
For more information on how the system operates under these
conditions, See
Tire Pressure Monitoring System
the warning stays on or continues to come on, have the system
checked as soon as possible.
Tire Pressure
Sensor Fault
Trailer
Action
Message
A correct trailer connection is sensed during
a given ignition cycle.
Trailer Connected
A trailer connection becomes disconnected,
either intentionally or unintentionally, and
has been sensed during a given ignition
cycle.
Trailer Disconnected
The trailer sway control has detected trailer
sway.
Trailer Sway Reduce Speed
There are certain faults in your vehicle
wiring and trailer wiring/brake system. See
Trailer Wiring Fault
There is a fault with your trailer turn lamp.
Check your lamp.
Trailer Left Turn Lamps Fault Check Lamps
There is a fault with your trailer turn lamp.
Check your lamp.
Trailer Right Turn Lamps Fault Check
Lamps
There is a fault with your trailer battery.
Trailer Battery Not Charging See Manual
There is a fault with your vehicle trailer
lighting module. See
Trailer Lighting Module Fault See Manual
134
Information Displays
Transmission
Action
Message
You switched the engine off and shift select lever is in any position
other than park (P).
Shift to Park
Transmission is too cold. Wait for it to warm up before you drive.
Transmission
Warming Up
Please Wait
Displays when the brake pedal needs to be depressed.
Press Brake Pedal
The transmission is overheating and needs to cool. Stop in a safe
place as soon as it’s possible.
Transmission Over
Temperature Stop
Safely
Have the system checked as soon as possible.
Transmission
Service Required
The transmission is overheating and needs to cool. Stop in a safe
place as soon as it’s possible.
Transmission Too
Hot Press Brake
The transmission has limited functionality. Have the system
checked as soon as possible.
Transmission
Limited Function
See Manual
A reminder to shift into park. In addition, this message is typical
after reconnecting or recharging the battery until you cycle the
ignition to the on mode. See
Transmission Not
in Park
Displays when there is a system fault and the park brake needs to
be depressed before exiting the vehicle. Have the system checked
as soon as possible.
SHIFT SYS FAULT
Confirm Park
Brake Apply Before
Exiting the Vehicle
Have the system checked as soon as possible.
SHIFT SYS FAULT
Service Required
Displays when there is a system fault while the vehicle is shifting
to park. Have the system checked as soon as possible.
SHIFT SYS FAULT
Vehicle is Shifting
to Park
Displays when there is a system fault while the vehicle is shifting
to reverse. Have the system checked as soon as possible.
SHIFT SYS FAULT
Reverse Unavail-
able Service
Required
135
Information Displays
Action
Message
Have the system checked as soon as possible.
SHIFT SYS FAULT
Drive Unavailable
Select S for Drive
Service Required
Have the system checked as soon as possible.
SHIFT SYS FAULT
Neutral Unavail-
able Service
Required
Have the system checked as soon as possible.
SHIFT SYS FAULT
Sport Unavailable
Service Required
Displays when an invalid gear has been selected.
Invalid Gear Selec-
tion
Displays when the brake pedal needs to be depressed to enable
the transmission to shift from park.
Depress Brake to
Shift from Park
Reminder to switch off the ignition while in neutral tow.
Neutral Tow
Engaged Turn Igni-
tion Off for Towing
Displays when neutral hold is active and you want to exit neutral
tow.
Neutral Tow
Engaged Depress
Brake and Select
Park to Exit
Neutral Tow
Reminder to remove park brake while in neutral tow.
Neutral Tow
Remove Park
Brake for Towing
Displays when the neutral tow is off.
Neutral Tow
Disengaged
Displays when neutral tow is on.
Neutral Tow
Enabled Leave
Transmission in
Neutral
136
Information Displays
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст