Ford Crown Victoria (2011 year). Manual — part 55

• Spray Motorcraft威 Engine Shampoo and Degreaser (ZC-20) on all

parts that require cleaning and pressure rinse clean. In Canada, use
Motorcraft

威 Engine Shampoo (CXC-66-A).

• Cover the highlighted areas to prevent water damage when cleaning

the engine.

• Never wash or rinse the engine while it is hot or running; water in the

running engine may cause internal damage.

• Never wash or rinse any ignition coil, spark plug wire or spark plug

well, or the area in and around these locations.

PLASTIC (NON-PAINTED) EXTERIOR PARTS

Use only approved products to clean plastic parts. These products are
available from your authorized dealer.
• For routine cleaning, use Motorcraft威 Detail Wash (ZC-3-A).
• If tar or grease spots are present, use Motorcraft威 Bug and Tar

Remover (ZC-42).

Cleaning

223

2011 Crown Victoria (cro)
Owners Guide, 3rd Printing
USA (fus)

WINDOWS AND WIPER BLADES

The windshield, rear and side windows and the wiper blades should be
cleaned regularly. If the wipers do not wipe properly, substances on the
vehicle’s glass or the wiper blades may be the cause. These may include
hot wax treatments used by commercial car washes, water repellent
coatings, tree sap, or other organic contamination; these contaminants
may cause squeaking or chatter noise from the blades, and streaking and
smearing of the windshield. To clean these items, follow these tips:
• The windshield, rear windows and side windows may be cleaned with

a non-abrasive cleaner such as Motorcraft

威 Ultra-Clear Spray Glass

Cleaner (ZC-23), available from your authorized dealer.

• The wiper blades can be cleaned with isopropyl (rubbing) alcohol or

Motorcraft

威 Premium Windshield Washer Concentrate (ZC-32-A) in

the U.S., or Premium Quality Windshield Washer Fluid [CXC-37-(A, B,
D, or F)] in Canada, available from your authorized dealer. This
washer fluid contains special solution in addition to alcohol which
helps to remove the hot wax deposited on the wiper blade and
windshield from automated car wash facilities. Be sure to replace
wiper blades when they appear worn or do not function properly.

• Do not use abrasives, as they may cause scratches.
• Do not use fuel, kerosene, or paint thinner to clean any parts.
If you cannot remove those streaks after cleaning with the glass cleaner
or if the wipers chatter and move in a jerky motion, clean the outer
surface of the windshield and the wiper blades using a sponge or soft
cloth with a neutral detergent or mild-abrasive cleaning solution. After
cleaning, rinse the windshield and wiper blades with clean water. The
windshield is clean if beads do not form when you rinse the windshield
with water.

Do not use sharp objects, such as a razor blade, to clean the
inside of the rear window or to remove decals, as it may cause
damage to the rear window defroster’s heated grid lines.

INSTRUMENT PANEL/INTERIOR TRIM AND CLUSTER LENS

Clean the instrument panel, interior trim areas and cluster lens with a
clean, damp, white cotton cloth, then use a clean and dry white cotton
cloth to dry these areas.
• Avoid cleaners or polishes that increase the gloss of the upper portion

of the instrument panel. The dull finish in this area helps protect the
driver from undesirable windshield reflection.

Cleaning

224

2011 Crown Victoria (cro)
Owners Guide, 3rd Printing
USA (fus)

• Be certain to wash or wipe your hands clean if you have been in

contact with certain products such as insect repellent and suntan
lotion in order to avoid possible damage to the interior painted
surfaces.

• Do not use household or glass cleaners as these may damage the

finish of the instrument panel, interior trim and cluster lens.

• Do not allow air fresheners and hand sanitizers to spill on interior

surfaces. If a spill occurs, wipe off immediately. Damage may not be
covered by your warranty.

WARNING: Do not use chemical solvents or strong detergents
when cleaning the steering wheel or instrument panel to avoid

contamination of the airbag system.

If a staining liquid like coffee/juice has been spilled on the instrument
panel or on interior trim surfaces, clean as follows:

1. Wipe up spilled liquid using a clean, white, cotton cloth.

2. Wipe the surface with a damp, clean, white cotton cloth. For more
thorough cleaning, use a mild soap and water solution. If the spot cannot
be completely cleaned by this method, the area may be cleaned using a
commercially available cleaning product designed for automotive
interiors.

3. If necessary, apply more soap and water solution or cleaning product
to a clean, white, cotton cloth and press the cloth onto the soiled
area–allow this to set at room temperature for 30 minutes.

4. Remove the soaked cloth, and if it is not soiled badly, use this cloth to
clean the area by using a rubbing motion for 60 seconds.

5. Following this, wipe area dry with a clean, white, cotton cloth.

INTERIOR

For fabric, carpets, cloth seats, safety belts and seats equipped with side
airbags:
• Remove dust and loose dirt with a vacuum cleaner.
• Remove light stains and soil with Motorcraft威 Professional Strength

Carpet & Upholstery Cleaner (ZC-54).

• If grease or tar is present on the material, spot-clean the area first

with Motorcraft

威 Spot and Stain Remover (ZC-14). In Canada, use

Motorcraft

威 Multi-Purpose Cleaner (CXC-101).

Cleaning

225

2011 Crown Victoria (cro)
Owners Guide, 3rd Printing
USA (fus)

• If a ring forms on the fabric after spot cleaning, clean the entire area

immediately (but do not oversaturate) or the ring will set.

• Do not use household cleaning products or glass cleaners, which can

stain and discolor the fabric and affect the flame retardant abilities of
the seat materials.

WARNING: Do not use cleaning solvents, bleach or dye on the
vehicle’s safety belts, as these actions may weaken the belt

webbing.

WARNING: On vehicles equipped with seat-mounted airbags, do
not use chemical solvents or strong detergents. Such products

could contaminate the side-airbag system and affect performance of
the side airbag in a collision.

LEATHER SEATS
(IF EQUIPPED, EXCEPT FOR THE KING RANCH

姞 EDITION)

For King Ranch

威 leather seats, refer to a separate section in this

chapter.
• Clean spills and stains as quickly as possible.
• For routine cleaning, wipe the surface with a soft, damp cloth. For

more thorough cleaning, wipe the surface with a mild soap and water
solution. In Canada, use Motorcraft

威 Vinyl Cleaner (CXC-93). Dry the

area with a soft cloth.

• If the leather cannot be completely cleaned using a mild soap and

water solution, the leather may be cleaned using a commercially
available leather cleaning product designed for automotive interiors.

• To check for compatibility, first test any cleaner or stain remover on

an inconspicuous part of the leather.

• Do not use household cleaning products, alcohol solutions, solvents or

cleaners intended for rubber, vinyl and plastics, or oil/petroleum-based
leather conditioners. These products may cause premature wearing or
damage to the leather.

LEATHER SEATS FOR THE KING RANCH

姞 EDITION ONLY

(IF EQUIPPED)

Your vehicle is equipped with seating covered in premium, top-grain
leather which is extremely durable, but still requires special care and
maintenance in order to ensure longevity and comfort.

Cleaning

226

2011 Crown Victoria (cro)
Owners Guide, 3rd Printing
USA (fus)