Ford Aspire (1997 year). Manual — part 15
57
Seating and Safety
Restraints
Seats
WARNING
Never adjust the driver’s seat or seatback
when the vehicle is moving.
WARNING
Always drive and ride with your seatback
upright and the lap belt snug and low
across the hips.
WARNING
Children should always ride with the
seatback in the fully upright position.
Adjusting the Seats
In the front seats, you can move the whole seat
forward or backward or tilt the back of the seat
forward or backward.
To move the seat forward or backward:
1.
Make sure nothing is placed under the front
seats. Such items may interfere with the seat
lock mechanism.
2.
Find the seat slide adjustment lever located
on the outside of the seat.
3.
Pull the lever up and hold it.
4.
Slide the seat to the position you desire.
5.
Release the lever and make sure the seat has
locked in place.
58
Seat slide adjustment lever
Seatback Recline
To recline the seatback:
1.
Find the seatback recline lever located on the
outside of the seat, toward the rear.
2.
Lean forward slightly and lift up on the
lever.
3.
Lean back on the seat and adjust the back of
the seat to the position you desire.
4.
Release the lever and make sure the seatback
is locked in place. (The lever MUST return
to its original position for the seatback to
lock.)
59
The lever used to recline the back of the seat
Rear Seat Access (2 door models)
To gain access to the rear seat:
1.
Locate the seatback recline lever. The lever is
located on the outside of the seat cushion.
2.
Raise the seatback recline lever to tilt the
seatback forward. Raise the seat slide
adjustment lever and move the seat forward
if extra room is needed. The seatback should
automatically lock when returned to its
upright position. Make sure the seatback is
locked in place.
WARNING
Check to see that the seat and seatback
are latched securely in position. Keep
floor area free of objects that would
prevent proper seat engagement. Never
attempt to adjust the seat while the
vehicle is in motion.
60
Using the Folding Rear Seat (If equipped)
Your vehicle may be equipped with a
full-folding or split-folding rear seat. In either
case, you can fold down the seatback (or
seatbacks) to provide extra cargo space. If you
have the rear safety belts routed through the
rear safety belt guides on either side of the seats,
the safety belts will not be trapped when the
seats are returned to their upright positions.
To fold down the rear seatback:
1.
Pull up on the release knob(s) located in the
upper corner(s) of the seatback. The
split-folding rear seat has one knob for each
seatback. The full-folding rear seat has two
knobs, which must both be raised at the
same time to lower the entire seatback.
2.
Pull the seatback forward until it is flat.
To raise the rear seatback:
1.
Push the seatback upward until it locks in
place.
2.
Make sure the seatback is firmly locked by
pushing forward and backward on it.
Folding down the full-folding rear seatback
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст