Ford Aspire (1997 year). Manual — part 42
166
Wiper blade replacement
If the wipers still do not work properly after
you clean them, you may need to replace the
wiper blade assembly. When replacing the wiper
blade assembly always use a Motorcraft part or
equivalent.
To replace the wiper blades:
1.
Pull the wiper arm away from the
windshield and into the lock position.
2.
Turn the blade at an angle from the wiper
arm. Push the lock pin with a screwdriver to
release the blade and pull the wiper blade
down toward the windshield to remove it
from the arm.
3.
Attach a new wiper blade to the wiper arm
and press it into place until you hear it click.
167
Replacing the wiper blades
Tires
Look at your tires each time you fill your fuel
tank. If one tire looks lower than the others,
check the pressure in all of them. Always follow
these precautions:
❑
Use an accurate tire pressure gauge.
❑
Check the tire pressure when tires are cold,
after the vehicle has been parked for at least
one hour or has been driven less than 3 miles
(5 km).
168
❑
Make sure the weight of your load is evenly
distributed.
❑
Adjust tire pressure to recommended
specifications found on the Safety Compliance
Certification Label.
If you do not take these precautions, your tires
may fail or go flat.
Ford Motor Company recommends obeying
posted speed limits.
WARNING
Driving too fast for conditions creates the
possibility of loss of vehicle control.
Driving at very high speeds for extended
periods of time may result in damage to
vehicle components.
At least once a month, check the pressure in all
your vehicle’s tires, including the spare. Use an
accurate tire pressure gauge. Check the tire
pressure when tires are cold, after the vehicle
has been parked for at least one hour or has
been driven less than 3 miles (5 km). You can
find proper cold pressure and load limits of
recommended size tires on the Safety
Compliance Certification Label.
WARNING
Improperly inflated tires can affect vehicle
handling and can fail suddenly, possibly
resulting in loss of vehicle control.
169
Tire Inspection and Maintenance
Inspect the tire treads and remove stones, nails,
glass or other objects that may be wedged in the
tread grooves. Check for holes or cuts that may
permit air to leak from the tire and make the
necessary repairs.
Inspect the tire sidewalls for cuts, bruises and
other damage. If you suspect internal damage to
the tire, have it removed and checked. You may
need to repair or replace it.
Tire Rotation
Because your vehicle’s front and rear tires
perform different jobs, they often wear
differently. To make sure your tires wear evenly
and last longer, rotate them as indicated in the
following diagram.
Do not include the spare tire as part of your
rotation.
For tire rotation intervals, see the
Maintenance
Schedule
booklet. If you notice the tires wearing
unevenly, have them checked.
Rotating the tires
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст