Ford Aspire (1997 year). Manual — part 9
33
The Climate Control Systems
Heating Only System (Without Air
Conditioning)
Function selector
The heater controls in your vehicle use levers to
control air direction and temperature. Fan speed
is controlled by a separate knob in the control
panel. The function selector lever lets you
control the direction of airflow.
Heating only system control panel
The symbols above the function selector lever
tell you where the air is being directed when the
lever is set to that position on the heater control
panel.
34
Function selector lever
V
is for defrosting the windows only. Air will
be directed out the defroster vents at the base of
the windshield and side window defogger vents.
T
(Mix) lets you direct air through the
defrosters and through the floor outlets.
R
(Floor) directs air only to the floor.
S
(Panel-Floor) directs air to the floor, and out
the instrument panel vents. You can “aim” the
air coming from the vents by moving the
instrument panel vents.
Q
(Panel) directs air out of the instrument panel
vents only.
Air door control lever
The air door control lever lets you choose
outside air or recirculated air from inside the
passenger area. Moving the lever to the
M
symbol closes the door and inside air is
recirculated. Moving the lever to the
N
symbol opens the door and outside air is drawn
in. Use the fresh air position for most conditions.
When the air door control lever is in the
recirculate position (far left), window fogging
can occur.
Use the recirculate position only to
improve air conditioning performance when
fresh air cooling is inadequate, or for short
periods to try to keep out odors from the
outside.
35
NOTE:
Do not use the recirculate position
when window fogging occurs.
Air door control lever
Temperature control lever
The air temperature can be adjusted by moving
the lever into the red area for warm air or into
the blue area for unheated air.
Temperature control lever
Fan
H
Fan speed can be controlled by turning the
fan speed control knob from OFF through 3
(high speed).
Turning on the heat
1.
Move the temperature control lever all the
way into the red area.
2.
Move the function selector lever to direct air
to the
R
(floor).
36
3.
Leave the air door control lever in the
N
(fresh air) position or the windows may fog
up in cold weather.
4.
Set the
H
(fan speed) to the desired speed.
As the interior warms up, select a slower fan
speed or move the temperature control lever
toward the blue area to keep a comfortable
setting.
Defrosting the windshield and side windows
1.
Set the temperature control lever all the way
to the right in the red area.
2.
Set the function selector lever to the
V
(defrost) position.
3.
Set the air door control lever to the
N
(fresh air) position.
4.
Set the
H
(fan speed) to the highest speed.
The fan speed can be adjusted to maintain
fog free windows after they are cleared.
Heating and defrosting at the same time
1.
Set the desired temperature and fan speed.
2.
Move the function selector lever to the
P
(mix) position and move the air door control
lever to the
N
(fresh air) position.
Ventilating your vehicle with outside air
On mild days, you may want to ventilate your
vehicle with outside air. To open the vents:
1.
Move the function selector lever to the
Q
(panel) position.
2.
Move the air door control lever to the
N
(fresh air) position.
3.
Set the
H
(fan speed) as desired.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст