Ford Ranger EV (2001 year). Manual — part 200
414-03B-196
414-03B-196
High Voltage/Traction Battery — Nickel Metal Hydride
DISASSEMBLY AND ASSEMBLY (Continued)
35. Install the K HVJ (17+ to 18-, 21+ to 22-) and
loosely install new nuts.
36. Install the A HVJ (1- to contactor box-) and
loosely install a new nut.
37. Tighten the HVJ nuts and fill the area around
the nuts with Nyogel.
414-03B-197
414-03B-197
High Voltage/Traction Battery — Nickel Metal Hydride
DISASSEMBLY AND ASSEMBLY (Continued)
38. Install the flow through blower.
39. Install the flow through blower cover.
40. Install the BCM/IOM bracket.
1 Position the bracket.
2 Install the bolts.
3 Install the 4-pin auxiliary connector bolt.
414-03B-198
414-03B-198
High Voltage/Traction Battery — Nickel Metal Hydride
DISASSEMBLY AND ASSEMBLY (Continued)
41. NOTE: The high voltage fuse is held in place
by the composite bar bolt.
Install the composite bars.
1 Position the bars.
2 Install the bolts.
42. Position the low-voltage harness and install the
pushpins.
43. Install the low-voltage harness push pins.
414-03B-199
414-03B-199
High Voltage/Traction Battery — Nickel Metal Hydride
DISASSEMBLY AND ASSEMBLY (Continued)
44. Connect the low-voltage harness.
1 Connect the blower electrical connector.
2 Connect the thermistor electrical connector.
3 Clip the relay into place.
45. Connect the thermistors and clip the relay into
the battery hold down tie bar covers.
46. Install the high-voltage harness.
1 Position the harness.
2 Install the push pins.
3 Connect the sense leads.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст