Ford Ranger EV (2001 year). Manual — part 150
414-03A-196
414-03A-196
High Voltage/Traction Battery
DISASSEMBLY AND ASSEMBLY (Continued)
82. Connect the two heating element connectors to
the harness and clip them into the separator
plate.
83. Connect the heating element connector to the
harness.
84. Position the heater harness down the center of
the battery around the LH front battery
modules.
85. Install two clips into the LH front separator
plate.
•
Place a zip tie through each of the clips.
414-03A-197
414-03A-197
High Voltage/Traction Battery
DISASSEMBLY AND ASSEMBLY (Continued)
86. Position the heater harness and low-voltage
harness across the separator plate and zip tie
them into place.
87. NOTE: The battery module is held into place
with strips of Velcro
TM
.
Install the BCM.
1 Position the BCM.
2 Connect the two upper high-voltage
connectors.
3 Connect the two lower low-voltage
connectors.
88. Clip the heating element connector into the
low-voltage harness.
414-03A-198
414-03A-198
High Voltage/Traction Battery
DISASSEMBLY AND ASSEMBLY (Continued)
89. Clip the contactor box jumper harness into the
separator plate.
90. Connect the P and M sense lead connectors.
•
Clip the P sense lead connector into the
high-voltage harness.
91. Connect the E, F, and N sense lead connectors.
•
Clip the F and N connectors into the
high-voltage harness.
•
Clip the E connector into the separator plate.
414-03A-199
414-03A-199
High Voltage/Traction Battery
DISASSEMBLY AND ASSEMBLY (Continued)
92. Connect the heating element electrical connector
and clip it into the BCM harness.
93. Position the contactor box harness.
•
Clip the contactor box harness into the four
high-voltage harness clips.
94. Clip the three contactor box harness clips into
the separator plate.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст