Ford Ranger EV (2001 year). Manual — part 71
310-02-7
310-02-7
Acceleration Control
REMOVAL AND INSTALLATION (Continued)
2. Remove the position sensor.
1 Remove the bolt.
2 Swing the sensor up and off the clip and
remove the sensor.
Installation
1. Install the position sensor.
1 Position the sensor on the clip and swing it
into position.
2 Install the bolt.
2. Connect the electrical connector.
Acceleration Position Sensor —Postal Ranger EV
Removal and Installation
1. NOTE: The acceleration postion sensor is
serviced as an assembly with the accelerator
pedal.
Remove the accelerator pedal assembly.
1 Disconnect the electrical connector.
2 Remove the bolt.
310-02-8
310-02-8
Acceleration Control
REMOVAL AND INSTALLATION (Continued)
2. To install, reverse the removal procedure.
412-01-1
GROUP
Electrical
4
SECTION TITLE
PAGE
Air Distribution and Filtering . . . . . . . . . . . . . . . . . . . . . . . . .
Heating and Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auxiliary Battery Charging. . . . . . . . . . . . . . . . . . . . . . . . . .
High Voltage/Traction Battery . . . . . . . . . . . . . . . . . . . . . . . ...
High Voltage/Traction Battery — Nickel Metal Hydride . . . . . . . . . . . . . ..
Module Communications Network . . . . . . . . . . . . . . . . . . . . . . ...
SECTION 412-01 Air Distribution and Filtering
VEHICLE APPLICATION:
Ranger EV
CONTENTS
PAGE
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . ...
DESCRIPTION AND OPERATION
Air Distribution and Filtering . . . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION
Air Filter. . . . . . . . . . . . . . . . . . . . . . . . .
Air Filter —Postal Ranger EV . . . . . . . . . . . . . . . . . ...
412-01-2
412-01-2
Air Distribution and Filtering
SPECIFICATIONS
Torque Specifications
Description
Nm
Lb-Ft
Lb-In
Blower Motor Screws
1.75
15.5
—
Reservoir Bolts and
7
62.5
—
Nuts
ABS Control Bracket
11
—
8
Bolts
The air filter is made from a pleated woven material
DESCRIPTION AND OPERATION
that offers minimal restriction to airflow. The filter
Air Distribution and Filtering
is located in the evaporator assembly behind the
The heating and cooling system on the Electric
blower motor. To ensure maximum climate control
Ranger uses an air filter to clean the air before it is
performance, the filter must be changed annually.
allowed to pass through the heater core. The heater
core uses electrical resistance to heat the air. Due to
the high temperatures associated with the heater
core, proper air filtration is essential.
REMOVAL AND INSTALLATION
Air Filter
1. Disconnect the blower motor electrical
connector.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст