Ford Fusion (2018 year). Manual — part 27

Doors and Locks

Action

Message

The door(s) listed is not completely closed.

X Door Ajar

The luggage compartment is not completely closed.

Trunk Ajar

The hood is not completely closed.

Hood Ajar

The system has disabled the door switches.

Switches Inhibited

Security Mode

The factory keypad code displays in the information display

after system resets the keypad.

Factory Keypad Code {X

X X X X}

Driver Alert

Action

Message

Stop and rest as soon as it is safe to do so.

Driver Alert Warning Rest

Now

Take a rest soon.

Driver Alert Warning Rest

Suggested

Fuel

Action

Message

An early reminder of a low fuel condition.

Fuel Level Low

The fuel fill inlet may not be properly closed.

Check Fuel Fill Inlet

Hill Start Assist

Action

Message

Hill start assist is not available. Contact an authorized dealer.

See Hill Start Assist (page 177).

Hill Start Assist Not

Available

Keys and Intelligent Access

Action

Message

A reminder to press the brake while starting your vehicle.

To START Press Brake

The system does not detect a key in your vehicle. See Keyless

Starting (page 146).

No Key Detected

You pressed the start/stop button to switch off the engine

and your vehicle does not detect your intelligent access key

inside your vehicle.

Restart Now or Key is

Needed

Your vehicle is in the run ignition state.

Accessory Power is

Active

There is a problem with your vehicle’s starting system. Contact

an authorized dealer for service.

Starting System Fault

You have successfully programmed an intelligent access key

to the system.

Key Program Successful

You have failed to program an intelligent access key to the

system.

Key Program Failure

You have programmed the maximum number of keys to the

system.

Max Number of Keys

Learned

You have not programmed enough keys to the system.

Not Enough Keys

Learned

The key battery is low. Change the battery as soon as possible.

Key Battery Low Replace

Soon

An attempt is made to program a spare key using two existing

keys.

Could Not Program

Integrated Key

A reminder that you are exiting your vehicle and the engine is

on.

Vehicle is ON

Lane Keeping System

Action

Message

The system has malfunctioned. Contact your authorized

dealer as soon as possible.

Lane Keeping Sys.

Malfunction Service

Required

The system has detected a condition that has caused the

system to be temporarily unavailable.

Front Camera Tempor-

arily Not Available

The system has detected a condition that requires the wind-

shield to be cleaned to operate properly.

Front Camera Low Visib-

ility Clean Screen

The system has malfunctioned. Contact your authorized

dealer as soon as possible.

Front Camera Malfunc-

tion Service Required

The system requests you to keep your hands on the steering

wheel.

Keep Hands on Steering

Wheel

Maintenance

Action

Message

Stop your vehicle as soon as safely possible and turn off the

engine. Check the oil level. If the warning stays on or continues

to come on with your engine running, contact an authorized

dealer as soon as possible.

Low Engine Oil Pressure

The engine oil life remaining is 10% or less. See Engine Oil

Check (page 259).

Change Engine Oil Soon

The oil life left is at 0%. See Engine Oil Check (page 259).

Oil Change Required

The brake fluid level is low, inspect the brake system immedi-

ately. See Brake Fluid Check (page 266).

Brake Fluid Level Low

The brake system needs servicing. Stop your vehicle in a safe

place. Contact an authorized dealer.

Check Brake System

The engine coolant temperature is excessively high. Stop your

vehicle in a safe place and allow the engine to cool. If the

problem persists, contact an authorized dealer. See Engine

Coolant Check (page 261).

Engine Coolant Over

Temperature

Action

Message

The engine has reduced power to help reduce high engine

temperature.

Power Reduced to

Lower Engine Temp

Your vehicle is still in Transport or Factory mode. This may

not allow some features to operate properly. See an author-

ized dealer.

Transport / Factory

Mode

The powertrain needs service due to a powertrain malfunction.

See Manual

MyKey

Action

Message

You cannot program a MyKey.

MyKey not Created

MyKey is active.

MyKey Active Drive

Safely

When switching on your vehicle and MyKey is in use, displays

that the MyKey speed limit is on.

Speed Limited to XX

MPH/km/h

MyKey is in use, the MyKey speed limit is on and your vehicle

speed is approaching 80 mph (130 km/h).

Near Vehicle Top Speed

You have reached the speed limit set for your MyKey.

Vehicle at Top Speed of

MyKey Setting

You have an active MyKey with a programmed set speed limit.

Check Speed Drive

Safely

The belt-minder turns on with a MyKey in use.

Buckle Up to Unmute

Audio

With a MyKey in use, AdvanceTrac turns on.

AdvanceTrac On -

MyKey Setting

With a MyKey in use, traction control turns on.

Traction Control On -

MyKey Setting

With a MyKey in use, park aid is always on.

MyKey Park Aid Cannot

be Deactivated

With a MyKey in use, lane keeping alert turns on.

Lane Keeping Alert On

MyKey Setting