Ford Fusion (2018 year). Manual — part 15

Locking Using Intelligent Access

E248554

With your intelligent access key within 3 ft
(1 m) of your vehicle, touch the outer door
handle lock sensor for approximately one
second to lock, being careful to not touch
the unlock sensor on the back of the door
handle at the same time. After locking, you
can immediately pull on the door handle
to confirm locking occurred without
inadvertently unlocking.

Opening the Luggage Compartment

E207425

Press the exterior release button hidden
above the license plate.

Smart Unlocks for Intelligent
Access Keys

This feature helps to prevent you from
locking your intelligent access key inside
your vehicle’s passenger compartment or
rear cargo area.

When you electronically lock your vehicle
with any door open, the transmission is in
park (P) and the ignition is off, the system
searches for an intelligent access key
inside your vehicle after you close the last
door. If the system finds a key, all of the
doors will immediately unlock and the horn
will sound twice, indicating that a key is
inside.

You can override the smart unlock feature
and intentionally lock the intelligent access
key inside your vehicle.

To do this, lock your vehicle after you have
closed all the doors by:
•

Using the keyless entry keypad.

•

Pressing the lock button on another
intelligent access key.

•

Touching the locking area on the front
of the door handle with another
intelligent access key in your hand.

When you open one of the front doors and
lock your vehicle using the power door lock
control, all doors will lock then unlock if:
•

The ignition is on.

•

The ignition is off and the transmission
is not in park (P).

Autolock

(If Equipped)

Autolock locks all the doors when all of the
following occur:
•

All doors are closed.

•

The ignition is on.

•

You shift into any gear putting your
vehicle in motion.

•

Your vehicle reaches a speed greater
than 12 mph (20 km/h).

Autolock repeats when:
•

You open then close any door when
the ignition is on and your vehicle speed
is 9 mph (15 km/h) or lower.

•

Your vehicle reaches a speed greater
than 12 mph (20 km/h).

Autounlock

Autounlock unlocks all the doors when all
of the following occur:
•

The ignition is on, all the doors are
closed, and your vehicle has been
moving at a speed greater than 12 mph
(20 km/h).

•

Your vehicle comes to a stop and you
switch the ignition off or to the
accessory position.

•

You open the driver door within 10
minutes of switching the ignition off or
to accessory.

Note: If you electronically lock your vehicle
after you switch the ignition off with the
driver door closed, the doors will not
autounlock.

Enabling or Disabling Autounlock

Note: You can switch autounlock and
autolock on or off independently of each
other.

Autolock is not configurable in all markets.
If the autolock settings are not available
in your information display, then the
system is not configurable. See General
Information (page 96).

Illuminated Entry

The interior lamps and some exterior
lamps illuminate when you unlock the
doors with the remote control.

The illuminated entry system turns off the
lights if:
•

The ignition is on.

•

You press the remote control lock
button.

•

After 25 seconds of illumination.

The lights will not turn off if:
•

You turn them on with the lamp
control.

•

Any door is open.

Illuminated Exit

The interior lamps and some exterior
lamps illuminate when all doors are closed
and you switch the ignition off.

The lamps turn off if all the doors remain
closed and:
•

25 seconds have elapsed.

•

You press the push button ignition
switch.

Battery Saver

If you leave the courtesy lamps, interior
lamps or headlamps on, the battery saver
shuts them off 10 minutes after you switch
the ignition off.

Battery Saver for Intelligent Access
Keys

If you leave the ignition switched on, it
shuts off when it detects a certain amount
of battery drain, or after 45 minutes.

KEYLESS ENTRY

(If Equipped)

SECURICODE™ Keyless Entry
Keypad

The keypad is near the driver window. It
illuminates when touched.

Note: If you enter your entry code too fast
on the keypad, the unlock function may not
work. Enter your entry code again more
slowly.

E138637

You can use the keypad to do the
following:
•

Lock or unlock the doors.

•

Release the luggage compartment.

•

Program and erase user codes.

•

Arm and disarm the anti-theft alarm.

You can operate the keypad with the
factory-set five-digit entry code. The code
is on the owner’s wallet card in the glove
box and is available from an authorized
dealer. You can also program up to five of
your own five-digit personal entry codes.

Programming a Personal Entry Code

1.

Enter the factory-set five-digit code.

2. Press 1·2 on the keypad within five

seconds.

3. Enter your personal five-digit code.

You must press each number within
five seconds of each other.

4. Press 1·2 on the keypad to save

personal code 1.

The doors lock then unlock to confirm that
programming was successful.

To program additional personal entry
codes, repeat steps 1 through 3, then for
step 4:
•

Press 3·4 to save personal code 2.

•

Press 5·6 to save personal code 3.

•

Press 7·8 to save personal code 4.

•

Press 9·0 to save personal code 5.

You can also program a personal entry
code using the touchscreen.

Hints:
•

Do not set a code that uses five of the
same number.

•

Do not use five numbers in sequential
order.

•

The factory-set code works even if you
have set your own personal code.

Erasing a Personal Code

1.

Enter the factory-set five-digit code.

2. Press and release 1·2 on the keypad

within five seconds.

3. Press 1·2 and hold for two seconds.

You must do this within five seconds
of completing step 2.

All personal codes erase and only the
factory-set five-digit code works.

Anti-Scan Feature

The keypad goes into an anti-scan mode
if you enter the wrong code seven times.
This mode turns off the keypad for one
minute and the keypad lamp flashes.

Anti-scan turns off after any of the
following occur:
•

One minute of keypad inactivity.

•

You press the unlock button on the
remote control.

•

You switch the ignition on.

•

You unlock the vehicle using intelligent
access.

Locking and Unlocking the Doors

Locking All Doors

Press and hold 7·8 and 9·0 on the keypad
simultaneously with the driver door closed.
You do not need to enter a code first.

Unlocking Only the Driver Door

Enter the factory-set or your personal
five-digit code. You must press each
number within five seconds of each other.
The interior lamps illuminate.

Note: All doors unlock if you switch on the
all door unlocking mode. See Locking and
Unlocking (page 61).

Unlocking All Doors

Enter the factory-set code or your personal
code, then press 3·4 on the keypad within
five seconds.

Opening the Luggage Compartment

Enter the factory-set code or your personal
code, then press 3·4 on the keypad within
five seconds.

Displaying the Factory-Set Code

Note: You need to have two programmed
keys for this procedure.

1.

Remove the key blade from the
transmitter.

E155835

2. Remove the rubber covering (A) from

the cup holder. With the buttons facing
upward and the unlock button facing
the front of your vehicle, place the first
intelligent access key into the backup
slot (B).

3. Press the push button ignition switch

once and wait a few seconds.

4. Press the push button ignition switch

again and remove the key.

5. Insert the second programmed key into

the backup slot, and then press the
push button ignition switch.

The factory-set code appears in the
information display for a few seconds.

Note: The code may not display until after
any other warning messages first display.

INTERIOR LUGGAGE
COMPARTMENT RELEASE

WARNINGS

Keep vehicle doors and luggage
compartment locked and keep keys
and remote transmitters out of a

child’s reach. Unsupervised children could
lock themselves in the trunk and risk injury.
Children should be taught not to play in
vehicles.