Ford Five Hundred (2007 year). Manual — part 21

3. Press and hold the RESET
control to set the language choice.

Units (English/Metric)

1. Select this function from the
SETUP menu for the current units
to be displayed.

2. Press the RESET control to
change from English to Metric.

System check

Selecting this function from the
SETUP menu causes the message
center to cycle through each of the
systems being monitored. For each
of the monitored systems, the
message center will indicate either an OK message or a warning message
for two to four seconds.

Pressing the RESET control cycles the message center through each of
the systems being monitored.

The sequence of the system check report is as follows:

1. OIL LIFE

2. DOORS CLOSED

3. LIFTGATE/TRUNK CLOSED

4. CHARGING SYSTEM

5. BRAKE SYSTEM

6. WASHER FLUID LEVEL
7. BRAKE FLUID LEVEL
8. COOLANT LEVEL
9. FUEL CAP SECURE
10. FUEL LEVEL
11. DISTANCE TO E

System warnings
System warnings alert you to possible problems or malfunctions in your
vehicle’s operating systems.

Driver Controls

86

In the event of a multiple warning situation, the message center will
cycle the display to show all warnings by displaying each one for several
seconds.

The message center will display the last selected feature if there are no
more warning messages. This allows you to use the full functionality of
the message center after you acknowledge the warning by pressing the
RESET control and clearing the warning message.

Warning messages that have been reset are divided into three categories:
• They will not disappear until a condition is changed.
• They will reappear on the display ten minutes from the reset.
• They will not reappear until an ignition OFF-ON cycle has been

completed.

This acts as a reminder that these warning conditions still exist within
the vehicle.

Warnings

Status

Driver’s door ajar

Warning cannot be reset (CLOSE
DOOR TO RESET) will be displayed

Passenger door ajar

Left rear door ajar

Right rear door ajar

Park brake engaged

RELEASE PARK BRAKE will be
displayed

Low fuel level

Warning returns after 10 minutes

Check charging system

Check brake system

Low brake fluid

Warning returns after the ignition key
is turned from OFF to RUN

Liftgate ajar (if equipped)

Trunk ajar (if equipped)

Washer Fluid level low

Change oil soon

Oil change required

DRIVER’S DOOR AJAR. Displayed when the driver’s door is not
completely closed.

PASSENGER DOOR AJAR. Displayed when the passenger side door is
not completely closed.

LEFT REAR DOOR AJAR. Displayed when the left rear door is not
completely closed.

Driver Controls

87

RIGHT REAR DOOR AJAR. Displayed when the right rear door is not
completely closed.

PARK BRAKE ENGAGED. Displayed when the park brake is engaged.
If the warning stays on after the park brake is off, contact your
authorized dealer as soon as possible.

LOW FUEL LEVEL. Displayed as an early reminder of a low fuel
condition.

CHECK CHARGING SYSTEM. Displayed when the electrical system is
not maintaining proper voltage. If you are operating electrical accessories
when the engine is idling at a low speed, turn off as many of the
electrical loads as possible. If the warning stays on or comes on when the
engine is operating at normal speeds, have the electrical system checked
as soon as possible.

CHECK BRAKE SYSTEM. Displayed when the brake system needs
servicing. If the warning stays on or continues to come on, contact your
authorized dealer as soon as possible.

LOW BRAKE FLUID. Indicates the brake fluid level is low and the
brake system should be inspected immediately. Refer to Brake fluid
reservoir
in the Maintenance and Specifications chapter.

LIFTGATE AJAR (if equipped). Displayed when the liftgate is not
completely closed.

TRUNK AJAR (if equipped). Displayed when the trunk is not
completely closed.

LOW WASHER FLUID LEVEL. Indicates the washer fluid reservoir is
less than one quarter full. Check the washer fluid level. Refer to
Windshield washer fluid in the Maintenance and Specifications
chapter.

CHANGE OIL SOON/OIL CHANGE REQUIRED. Oil Life XX%,
CHANGE SOON/OIL LIFE 0%, CHANGE OIL, OIL LIFE XX%, CHANGE
SOON displayed when the engine oil life remaining is 10 percent and
again when the engine oil life remaining is between 5% and 1%. When oil
life left reaches 0%, the OIL LIFE 0%, CHANGE OIL message will be
displayed.

An oil change is required whenever indicated by the message center and
according to the recommended maintenance schedule. USE ONLY
RECOMMENDED ENGINE OILS.

Driver Controls

88

To reset the oil monitoring system to 100% after each oil change
[approximately 5,000 miles (8,000 km) or 180 days] perform the
following:

To reset the oil life to 100% with system warnings CHANGE OIL
SOON/OIL CHANGE REQUIRED displayed:

1. Select this function from the
SETUP control for current display
mode.

2. Press and release the RESET
control to display “IF NEW OIL
HOLD RESET”.

3. Press and hold the RESET
control to display OIL LIFE SET TO
100%. Your oil life is now reset.

To set the oil life to 100% without system warnings displayed:

Press SETUP to display “PRESS
RESET FOR SYS CHECK”.

1. Press RESET to start the System
Check which will display “OIL LIFE
XX% RESET IF NEW”.

2. Press and hold the RESET until
“IF NEW OIL HOLD RESET” is
displayed, then release.

Driver Controls

89

Была ли эта страница вам полезна?
Да!Нет
2 посетителя считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности