Ford Fusion Hybrid (2014 year). Manual — part 30

E142554

Saving a Pre-Set Position

1.

Switch the ignition on.

2. Adjust the seat and exterior mirrors to

your desired position.

3. Press and hold the desired pre-set

button until you hear a single chime.

You can save up to three pre-set memory
positions. You can save a memory pre-set
at any time.

Recalling a Pre-Set Position

Press and release the pre-set button
associated with your desired driving
position. The seat and mirrors will move to
the position stored for that pre-set.

Note: A pre-set memory position can only
be recalled when the ignition is off, or when
the transmission selector lever is in position
P or N (and your vehicle is not moving) if
the ignition is on.

You can recall a pre-set memory position
by pressing the unlock button on your
remote control or intelligent access key if
it is linked to a pre-set position.

Linking a Pre-Set Position to your
Remote Control or Intelligent
Access Key

Your vehicle can save the pre-set memory
positions for up to three remote controls
or intelligent access (IA) keys.

1.

With the ignition on, move the memory
positions to the desired positions.

2. Press and hold the desired pre-set

button for about five seconds. A chime
will sound after about two seconds.
Continue holding until a second chime
is heard.

3. Within three seconds, press the lock

button on the remote control you are
linking.

To unlink a remote control, follow the
same procedure – except in step 3, press
the unlock button on the remote control.

Note: To stop seat movement during a
recall, press any driver seat adjustment
control, any of the memory buttons, or any
mirror control switch.

Seat movement will also stop if you move
your vehicle.

Note: If more than one linked remote
control or intelligent access key is in range,
the memory function will move to the
settings of the first key stored.

Easy Entry and Exit Function

If you enable the easy entry and exit
feature, it automatically moves the driver
seat position rearward up to five
centimeters when the transmission
selector lever is in position P and you
remove the key or turn off the keyless start
ignition.

The driver seat will return to the previous
position when you put the key in the
ignition or you activate the keyless start
ignition.

You can turn off the easy entry and exit
feature by using the driver information
display.

123

Seats

REAR SEATS

Note: Your vehicle may have split seat
backs that must be folded individually.

To lower the seat back(s) from inside the
vehicle, do the following:

E144634

1.

Pull the handle to release the seat
back.

2. Push the seat back forward.

E164098

3. Stow the safety belt in the stowage

clip. This will prevent the safety belt
from getting caught in the seat latch.

When raising the seat back(s), make sure
you hear the seat latch into place.

124

Seats

HEATED SEATS

(IF EQUIPPED)

WARNING

People who are unable to feel pain
to their skin because of advanced
age, chronic illness, diabetes, spinal

cord injury, medication, alcohol use,
exhaustion or other physical conditions,
must exercise care when using the heated
seat. The heated seat may cause burns
even at low temperatures, especially if
used for long periods of time. Do not place
anything on the seat that insulates against
heat, such as a blanket or cushion. This
may cause the heated seat to overheat.
Do not puncture the seat with pins, needles
or other pointed objects. This may damage
the heating element which may cause the
heated seat to overheat. An overheated
seat may cause serious personal injury.

Do not do the following:

•

Place heavy objects on the seat.

•

Operate the heated seat if water or any
other liquid is spilled on the seat. Allow
the seat to dry thoroughly.

•

Operate the heated seats unless the
engine is running. Doing so can cause
the battery to lose charge.

E146941

Press the heated seat symbol to cycle
through the various heat settings and off.
Warmer settings are indicated by more
indicator lights.

VENTILATED SEATS

(IF EQUIPPED)

The ventilated seats will only function
when the engine is running.

E146309

To operate the ventilated seats:

Press the ventilated seat symbol to cycle
through the various cooling settings and
off. Cooler settings are indicated by more
indicator lights.

If the engine falls below 350 RPM while
the ventilated seats are on, the feature will
turn itself off and you will need to
reactivate it.

Heated and ventilated seat air
filter replacement (if equipped)

Your vehicle is equipped with lifetime air
filters that are integrated with the seats.
Regular maintenance or replacement is
not needed.

REAR SEAT ARMREST

E144635

125

Seats

Fold the armrest down to use the armrest
and cupholder.

126

Seats