Ford Fusion Hybrid (2014 year). Manual — part 25

Action

Message

Displays when the engine has reduced power in order to help

reduce high coolant temperatures.

Power Reduced to

Lower Engine Temp

Displays to indicate that the vehicle is still in Transport or

Factory mode. This may not allow some features to operate

properly. See your authorized dealer.

Transport / Factory

Mode

Informs the driver that the powertrain needs service due to a

powertrain malfunction.

See Manual

MyKey

Action

Message

Displayed during key programming when MyKey cannot be

programmed.

MyKey Not Created

Displays when MyKey is active.

MyKey Active Drive

Safely

Displays when starting the vehicle and MyKey is in use and

the MyKey speed limit is on.

Speed Limited to XX

MPH/km/h

Displays when a MyKey is in use and the MyKey speed limit is
on and the vehicle speed is approaching 80 mph (130 km/h).

Near Vehicle Top Speed

Displays when a MyKey is in use and the MyKey speed limit is

reached.

Vehicle at Top Speed of

MyKey Setting

Displays when MyKey is active.

Check Speed Drive

Safely

Displays when a MyKey is in use and Belt-Minder is activated.

Buckle Up to Unmute

Audio

Displays when a MyKey is in use and AdvanceTrac is activated.

AdvanceTrac On -

MyKey Setting

Displays when a MyKey is in use and Traction control is

activated.

Traction Control On -

MyKey Setting

Displays when a MyKey is in use and park aid is activated.

MyKey Park Aid Cannot

be Deactivated

Displayed when the lane keeping aid is on per MyKey settings.

Lane Keeping Alert On

MyKey Setting

103

Information Displays

Park Aid

Action

Message

Displays when the system has detected a condition that

requires service. Contact your authorized dealer. See Parking

Aid (page 167).

Check Front Park Aid

Displays when the system has detected a condition that

requires service. Contact your authorized dealer. See Parking

Aid (page 167).

Check Rear Park Aid

Displays the park aid status.

Front Park Aid On Off

Displays the park aid status.

Rear Park Aid On Off

Park Brake

Action

Message

Displays when the parking brake is set, the engine is running

and the vehicle is driven more than 3 mph (5 km/h). If the

warning stays on after the parking brake is released, contact

your authorized dealer.

Park Brake Engaged

The electric parking brake system has detected a condition

that requires service. See your authorized dealer.

Park Brake Malfunction

Service Now

Displays when the electric parking brake is not set.

Park Brake Not Applied

Apply Park Brake

Displays when the electric parking brake is running a diagnostic

check.

Park Brake Maintenance

Mode

Displays when the electric parking brake is set but has not be

released.

Park Brake Use Switch

to Release

Displays when the electric parking brake is set but has not be

released and the vehicle is moving.

Press Brake to Release

Park Brake and Switch

The electric park brake system has detected a condition that

requires service. See your authorized dealer.

Park Brake Limited

Function Service

Required

Displays when the electric parking brake was not released

causing it to overheat.

Park Brake System

Overheated

104

Information Displays

Action

Message

Displays when the electric parking brake is set and the vehicle

is started.

Release Park Brake

Displays when the electric parking brake is set.

Park Brake Applied

Displays when the electric parking brake is released.

Park Brake Released

Power Steering

Action

Message

The power steering system has detected a condition that

requires service. See your authorized dealer.

Steering Fault Service

Now

The power steering system is not working. Stop the vehicle a

safe place. Contact your authorized dealer.

Steering Loss Stop

Safely

The power steering system has detected a condition within

the power steering system or passive entry or passive start

system requires service. Contact your authorized dealer.

Steering Assist Fault

Service Required

Remote Start

Action

Message

Displays as a reminder to turn the key on to drive the vehicle

after a remote start.

To Drive: Turn Key to On

Displays as a reminder to apply the brake and the start button

to drive the vehicle after a remote start.

To Drive: Press Brake

and Start Button

Seats

Action

Message

Displays as a reminder that memory seats are not available

while driving.

Memory Recall Not

Permitted While Driving

Displays to show where your memory setting has been saved.

Memory X Saved

105

Information Displays

Starting System

Action

Message

Displays when starting the vehicle as a reminder to apply the

brake.

Press Brake to Start

Displays when the starter is attempting to start the vehicle.

Engine Start Pending

Please Wait

Displays when the pending start has been cancelled.

Pending Start Cancelled

Displays when the starter has exceeded its cranking time in

attempting to start the vehicle.

Cranking Time Exceeded

Tire Pressure Monitoring System

Action

Message

Displays when one or more tires on your vehicle have low tire
pressure. See Tire Pressure Monitoring System (page 275).

LOW Tire Pressure

Displays when the tire pressure monitoring system is

malfunctioning. If the warning stays on or continues to come

on, contact your authorized dealer. See Tire Pressure

Monitoring System (page 275).

Tire Pressure Monitor

Fault

Displayed when a tire pressure sensor is malfunctioning, or

your spare tire is in use. For more information on how the

system operates under these conditions, See Tire Pressure

Monitoring System (page 275). If the warning stays on or

continues to come on, contact your authorized dealer as soon

as possible.

Tire Pressure Sensor

Fault

Traction Control

Action

Message

Displays when the traction control system has been switched

off or on. See Using Traction Control (page 165).

Traction Control Off /

Traction Control On

Displays when a spinout has occurred and the hazard are

activated.

Spinout Detected

Hazards Activated

106

Information Displays