Ford Fusion Hybrid (2014 year). Manual — part 92

When HD Radio broadcasts are active, you
can access the following functions:

Scan allows you to hear a brief
sampling of all available stations. This
feature still works when HD Radio
reception is on, although it does not
scan for HD2-HD7 channels. You may
see the HD logo appear if the station
has a digital broadcast.

Memory presets allow you to save an
active channel as a memory preset.
Touch and hold a memory preset slot
until the sound returns. There is a brief
mute while the radio saves the station.
Sound returns when finished. When
switching to an HD2 or HD3 memory
preset, the sound mutes before the
digital audio plays, because the system
has to reacquire the digital signal.

Note: As with any saved radio station, you
cannot access the saved station if your
vehicle is outside the station’s reception
area.

HD Radio Reception and Station Troubleshooting

Potential reception issues

If you are listening to a multicast station and you are on
the fringe of the reception area, the station may mute due
to weak signal strength.

Reception area

If you are listening to HD1, the system switches back to
the analog broadcast until the digital broadcast is available
again. However, if you are listening to any of the possible
HD2-HD7 multicast channels, the station mutes and stays
muted unless it is able to connect to the digital signal
again.

When the system first receives a station (aside from HD2-
HD7 multicast stations), it first plays the station in the
analog version. Once the receiver verifies the station is an
HD Radio station, it shifts to the digital version. Depending
on the station quality, you may hear a slight sound change
when the station changes from analog to digital. Blending
is the shift from analog to digital sound or digital back to
analog sound.

Station blending

In order to provide the best possible
experience, use the contact form to report
any station issues found while listening to
a station broadcasting with HD Radio
technology. Independent entities own and
operate each station. These stations are
responsible for ensuring all audio streams
and data fields are accurate.

371

MyFord Touch™

(If Equipped)

Potential station issues

Action

Cause

Issues

No action required. This is a
broadcast issue.

This is poor time alignment
by the radio broadcaster.

Echo, stutter, skip or repeat
in audio.
Increase or decrease in
audio volume.

No action required. The
reception issue may clear up
as you continue to drive.

The radio is shifting between
analog and digital audio.

Sound fading or blending in
and out.

No action required. This is
normal behavior. Wait until
the audio is available.

The digital multicast is not
available until the HD Radio
broadcast is decoded. Once
decoded, the audio is avail-
able.

There is an audio mute
delay when selecting HD2 or
HD3, multicast preset or
Direct Tune.

No action required. The
station is not available in
your current location.

The previously stored
multicast preset or direct
tune is not available in your
current reception area.

Cannot access HD2 or HD3
multicast channel when
recalling a preset or from a
direct tune.

Fill out the station issue
form at website listed

below.

*

Data service issue by the
radio broadcaster.

Text information does not
match currently playing
audio.

Fill out the station issue
form at website listed

below.

*

Data service issue by the
radio broadcaster.

There is no text information
shown for currently selected
frequency.

No action required. This is
normal behavior.

Pressing Scan disables
HD2-HD7 channel search.

HD2-HD7 stations not found
when Scan is pressed.

*

http://www.ibiquity.com/automotive/report_radio_station_experiences

HD Radio Technology manufactured under
license from iBiquity Digital Corp. U.S. and
foreign patents. HD Radio and the HD and
HD Radio logos are proprietary trademarks
of iBiquity Digital Corp. Ford Motor
Company and iBiquity Digital Corp. are not
responsible for the content sent using HD
Radio technology. Content may be
changed, added or deleted at any time at
the station owner's discretion.

Radio Voice Commands

E142599

If you are listening to the radio,
press the voice button on the
steering wheel controls. When

prompted, say any of the following
commands.

If you are not listening to the radio, press
the voice button and, after the tone, say
"Radio", then any of the following
commands.

372

MyFord Touch™

(If Equipped)

"RADIO"

"<87.9-107.9>"

"<87.9-107.9> HD"

1

"<530-1710>"

"AM"

"AM <530-1710>"

"AM autoset"

"AM autoset preset <#>"

"AM preset <#>"

"Browse"

2

"FM"

"FM <87.9-107.9>"

"FM <87.9-107.9> HD <#>"

1

"FM autoset"

"FM autoset preset <#>"

"FM preset <#>"

"FM 1"

"FM 1 preset <#>"

"FM 2"

"FM 2 preset <#>"

"HD <#>"

1

"Preset <#>"

"Radio off"

"Radio on"

"Set PTY"

"RADIO"

"Tune"

3

"Help"

1

If available.

2

If you have said "Browse", see the

"Browse" chart later in this section.

3

If you have said "Tune", see the following

"Tune" chart.

"TUNE"

"<530-1710>"

"<87.9-107.9>"

"<87.9-107.9> HD <#>"

*

"AM"

"AM <530-1710>"

"AM autoset"

"AM autoset preset <#>"

"AM preset <#>"

"FM"

"FM <87.9-107.9>"

"FM <87.9-107.9> HD <#>"

*

"FM autoset"

"FM autoset preset <#>"

"FM preset <#>"

"FM 1"

"FM 1 preset <#>"

"FM 2"

"FM 2 preset <#>"

373

MyFord Touch™

(If Equipped)

"TUNE"

"HD <#>"

*

"Preset <#>"

"Help"

*

If available.

SIRIUS® Satellite Radio (If
Activated)

E142611

Press the lower left corner of the
touchscreen, and then select the
SIRIUS tab.

Memory Presets

Save a channel by pressing and holding
one of the memory preset areas. There is
a brief mute while the radio saves the
channel. Sound returns when finished.

ALERT

Save the current song, artist, or team as a
favorite. The system alerts you when it
plays again on any channel.

Replay

Replay audio on the current channel. You
can replay approximately 45 minutes of
audio as long as you have remained tuned
to the current station. Changing stations
erases the previous audio.

While in replay mode:

Press and release the seek buttons to
hear the previous or next song.

Press and hold the seek buttons to
reverse or fast forward in the current
track.

Press play or pause to play or pause
the audio.

Press Replay to return to live audio if
you have been using the feature to
replay audio.

Scan

Touch this button to hear a brief sampling
of channels.

Options

Touch this button to view and adjust
various media settings.

Sound Settings

Touch this button to adjust settings for:

Bass

Midrange

Treble

Balance and Fade

DSP (Digital Signal processing)

Occupancy Mode

Speed Compensated Volume.

Note: Your vehicle may not have all these
sound settings.

Set Category for Seek/Scan

This allows you to select a category of
music you would like to search for. You can
then choose to either seek or scan for the
stations playing that category.

Parental Lockout

This allows you to lock and unlock
channels, change or reset your PIN or
unlock all channels. To use this feature,
you need your initial PIN, which is 1234.

Artist/Title/Team Alerts

This feature allows you to select Artists,
Titles and Teams that you would like the
system to alert you to when they are
playing on other channels. Press Edit Alerts
to delete or turn off alerts. You can also
set all alerts to on or off. When an alert
appears on the screen, you can choose to

374

MyFord Touch™

(If Equipped)

Была ли эта страница вам полезна?
Да!Нет
4 посетителя считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности