Ford F150 Pickup. Instruction — part 1098

Fig. 302: Material Specification
Courtesy of FORD MOTOR CO.

1. If necessary, install the following:

1. the cylinder block dowels.

2. the oil gallery plugs.

3. the water jacket plugs.

CAUTION: The moving components must be lubricated with clean engine

oil before assembly.

CAUTION: The components with oil holes must be correctly aligned with

the oil feed holes.

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup

Fig. 303: Installing Cylinder Block Dowels, Oil Gallery Plugs & Water Jacket Plugs
Courtesy of FORD MOTOR CO.

2. If equipped, install the block heater. For additional information, refer to ENGINE

COOLING .

3. Using the appropriate tools in the Camshaft Bearing Service Set, install the engine dynamic

balance shaft bearings.

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup

Fig. 304: Installing Engine Dynamic Balance Shaft Bearings
Courtesy of FORD MOTOR CO.

4. Using the appropriate tools in the Camshaft Bearing Service Set, install the camshaft

bearings.

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup

Fig. 305: Installing Camshaft Bearings
Courtesy of FORD MOTOR CO.

5. Install the following:

1. the engine dynamic balance shaft bearing cover.

2. the camshaft bearing cover.

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup