Ford F150 Pickup. Instruction — part 1064
Fig. 166: Identifying RH Exhaust Manifold Bolt Tightening Sequence
Courtesy of FORD MOTOR CO.
9. To install, reverse the removal procedure.
Tighten the exhaust manifold retainers in the sequence shown.
CYLINDER HEAD
Material
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 167: Material Specification
Courtesy of FORD MOTOR CO.
Removal
Both Cylinder Heads
1. Remove the lower intake manifold. For additional information, refer to LOWER INTAKE
MANIFOLD .
2. Remove the LH valve cover. For additional information, refer to VALVE COVER LH .
3. Remove the RH valve cover. For additional information, refer to VALVE COVER RH .
4. Remove the exhaust manifold. For additional information, refer to EXHAUST
MANIFOLD LH or EXHAUST MANIFOLD RH .
LH Cylinder Head
5. Position the power steering pump reservoir aside.
1. Remove the bolts.
2. Position the power steering reservoir aside.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 168: Position Power Steering Pump Reservoir Aside
Courtesy of FORD MOTOR CO.
6. Remove the A/C compressor, if equipped. For additional information, refer to AIR
CONDITIONING - F150 PICKUP .
7. Remove and support the A/C compressor mounting bracket (2882) and power steering
pump (3A674).
1. Remove the bolts.
2. Remove the nuts.
3. Loosen the remaining (A) bolt until the (B) A/C compressor mounting bracket and
power steering pump are free from the LH cylinder head. Support the A/C compressor
mounting bracket and power steering pump and position aside.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 169: Removing A/C Compressor Mounting Bracket
Courtesy of FORD MOTOR CO.
8. Disconnect the Cylinder Head Temperature (CHT) sensor and the knock sensor electrical
connectors.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст