Ford F150 Pickup. Instruction — part 611
Fig. 63: Using A Drive Pinion Bearing Adjustment Shim As A Gauge For Shim Selection
Courtesy of FORD MOTOR CO.
10. Use a drive pinion bearing adjustment shim as a gauge for shim selection.
z
After the correct shim thickness has been determined, remove the special tools.
11. Using the special tools, press the pinion bearing and pinion shim until they are firmly seated on the
pinion.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
Fig. 64: Installing Pinion Bearing & Pinion Shim
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
12. Place a new drive pinion collapsible spacer (4662) on the pinion shaft against the pinion stem shoulder.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст