Ford F150 Pickup. Instruction — part 477
Fig. 85: Removing Shift Lever & Clutch Fork
Courtesy of FORD MOTOR CO.
14. If necessary, remove the shift lever and the clutch fork (3N139).
1. Drive the instruction shaft retaining pin through the clutch fork.
2. Remove the shift lever and the clutch fork.
15. Remove and discard the O-ring.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Fig. 86: Removing O-Ring
Courtesy of FORD MOTOR CO.
16. Remove the axle shaft (3A381).
1. Remove the snap ring.
2. Remove the axle shaft.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Fig. 87: Removing Axle Shaft
Courtesy of FORD MOTOR CO.
CAUTION: The housing spreader adapter bolts must have the minimum
specified thread engagement in the carrier.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Fig. 88: Installing Special Tools
Courtesy of FORD MOTOR CO.
17. Install the special tools.
18. Position the special tool on the spreader adapters.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст