Ford F150 Pickup. Instruction — part 1046

Fig. 93: Removing Crankshaft Pulley Bolt
Courtesy of FORD MOTOR CO.

6. Using the special tool, remove the crankshaft pulley (6B321).

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup

Fig. 94: Removing Crankshaft Pulley
Courtesy of FORD MOTOR CO.

Installation

1. Apply a bead of silicone gasket and sealant to the keyway in the crankshaft damper and use

the special tool to install the crankshaft damper.

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup

Fig. 95: Installing Crankshaft Damper
Courtesy of FORD MOTOR CO.

2. Install the bolt.

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup

Fig. 96: Installing Crankshaft Pulley Bolt
Courtesy of FORD MOTOR CO.

3. Lower the vehicle.

4. Connect the battery ground cable. For additional information, refer to BATTERY,

MOUNTING AND CABLES - F150 PICKUP .

5. Install the fan blade assembly. For additional information, refer to ENGINE COOLING .

6. Install the drive belt. For additional information, refer to ACCESSORY DRIVE - F150

PICKUP .

CRANKSHAFT FRONT OIL SEAL

Special Tool(s)

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup