Ford F150 Pickup. Instruction — part 866
7. Tighten the bolts in the sequence shown.
Fig. 376: Identifying Camshaft Bearing Cap Bolt Tightening Sequence - 5.4L
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Courtesy of FORD MOTOR CO.
All Engines
8. Install the camshaft roller followers. For additional information, refer to CAMSHAFT
ROLLER FOLLOWER .
9. Install the timing chains. For additional information, refer to TIMING DRIVE
COMPONENTS - ROMEO ENGINE (4.6L) or TIMING DRIVE COMPONENTS -
WINDSOR ENGINE (5.4L) .
EXHAUST MANIFOLD RH
Removal & Installation
1. Raise and support the vehicle. For additional information, refer to JACKING &
HOISTING .
2. On 4x4 vehicles, remove the front wheel opening molding. For additional information, refer
to FRONT END BODY PANELS - F150 PICKUP .
3. Remove the front fender splash shield. For additional information, refer to FRONT END
BODY PANELS - F150 PICKUP .
NOTE:
4.6L engine shown; 5.4L engine similar.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Fig. 377: Removing Three-Way Catalytic Converter To Exhaust Manifold Nuts
Courtesy of FORD MOTOR CO.
4. Remove the three-way catalytic converter to exhaust manifold nuts.
5. Remove the eight nuts and the exhaust manifold.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Fig. 378: Removing RH Exhaust Manifold
Courtesy of FORD MOTOR CO.
6. Remove and discard the exhaust manifold gasket.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст