Ford F150 Pickup. Instruction — part 614
Fig. 74: Driveshaft Flange Bolt Tightening Sequence
Courtesy of FORD MOTOR CO.
23. Install the driveshaft.
DIFFERENTIAL CASE
Special Tool(s)
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
Fig. 75: Identifying Special Tool(s)
Courtesy of FORD MOTOR CO.
Removal
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
1. Remove the axle shafts (4234). For additional information, refer to AXLE SHAFT .
2. Wipe the lubricant from the internal working parts, and visually inspect the parts for wear or damage.
3. Rotate the differential case (4204) to see if there is any roughness which would indicate damaged
bearings or gears.
Fig. 76: Rotating Differential Case
Courtesy of FORD MOTOR CO.
NOTE:
There is a space between the anti-lock speed sensor ring and the ring gear
for measuring ring gear backface runout.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
Fig. 77: Inspecting Ring Gear Backface Runout
Courtesy of FORD MOTOR CO.
4. Position the special tool and inspect the ring gear backface runout.
CAUTION: Mark the position of the bearing caps as arrows may not be visible.
The bearing caps must be installed in their identical locations and
positions.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст