Ford F150 Pickup. Instruction — part 1301
Fig. 69: Identifying DPFE Sensor (4.2L)
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - Blackwood, Expedition, F150 Pickup & Navigator - Gasoline
Fig. 70: Identifying DPFE Sensor (4.6L)
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - Blackwood, Expedition, F150 Pickup & Navigator - Gasoline
Fig. 71: Identifying DPFE Sensor (5.4L)
Courtesy of FORD MOTOR CO.
FUEL TANK PRESSURE SENSOR
Removal & Installation
Fuel tank pressure sensor is located in top of fuel tank. Remove fuel tank. See FUEL TANK under FUEL
SYSTEMS. Disconnect electrical connector. Press down and rotate fuel tank pressure sensor counterclockwise
and remove from fuel tank. See Fig. 72 . To install, reverse removal procedure. Perform after repair procedure.
See AFTER REPAIR PROCEDURE .
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - Blackwood, Expedition, F150 Pickup & Navigator - Gasoline
Fig. 72: Removing Fuel Tank Pressure Sensor
Courtesy of FORD MOTOR CO.
INERTIA FUEL SHUTOFF SWITCH
Blackwood
Disconnect the battery. Remove the right front door scuff plate and kick panel. Remove Inertia Fuel Shutoff
(IFS) switch connector and the 2 retaining bolts. Remove the IFS switch. See Fig. 73 . To install, reverse
removal procedure.
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - Blackwood, Expedition, F150 Pickup & Navigator - Gasoline
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст