Ford F150 Pickup. Instruction — part 463
Fig. 27: Identifying Special Tool(s)
Courtesy of FORD MOTOR CO.
Removal
CAUTION: This operation disturbs the pinion bearing preload. Carefully reset the
preload during assembly.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
1. Raise and support the vehicle. For additional information, refer to JACKING & HOISTING .
2. Remove the front differential support.
1. Remove the nut and bolt.
2. Remove the nuts and bolts.
3. Remove the front differential support.
Fig. 28: Removing Front Differential Support
Courtesy of FORD MOTOR CO.
3. Index-mark the front driveshaft to the axle universal joint flange (4858).
NOTE:
The front drive axle must be in NEUTRAL before beginning this procedure.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Fig. 29: Front Driveshaft To Axle Universal Joint Flange Index-Marks
Courtesy of FORD MOTOR CO.
CAUTION: Do not allow the driveshaft to hang unsupported.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Fig. 30: Disconnecting Front Driveshaft
Courtesy of FORD MOTOR CO.
4. Disconnect and support the front driveshaft.
1. Remove the four bolts.
2. Carefully disconnect and support the front driveshaft.
5. Using a N.m (inch/pound) torque wrench, measure the torque necessary to maintain pinion rotation.
Record the measurement for reference during installation.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст