Ford F150 Pickup. Instruction — part 391
brake master cylinder and power brake booster in the engine compartment.
6. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE
SPECIFICATIONS . Bleed brakes. See BLEEDING BRAKE SYSTEM .
Fig. 30: Identifying Stoplight Switch Self-Locking Pin
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2002-04 BRAKES Disc & Drum - Blackwood, F150 Heritage Pickup & F150 Pickup
Fig. 31: Removing Stoplight Switch
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2002-04 BRAKES Disc & Drum - Blackwood, F150 Heritage Pickup & F150 Pickup
Fig. 32: Identifying Bulkhead Sound Insulator & Brake Pedal Bracket Nuts
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2002-04 BRAKES Disc & Drum - Blackwood, F150 Heritage Pickup & F150 Pickup
Fig. 33: Identifying Brake Pedal Bracket Bolts
Courtesy of FORD MOTOR CO.
Removal & Installation (Fixed Pedals With M/T)
1. Disconnect the clutch master cylinder push rod. See Fig. 34 .
2. Disconnect the Clutch Pedal Position (CPP) switch. See Fig. 35 .
3. Remove the clutch master cylinder by rotating the clutch master cylinder 45 degrees clockwise. See Fig.
36 .
4. Remove the stoplight switch self-locking pin. See Fig. 30 .
5. Slide the stoplight switch and the booster push rod off the brake pedal pin. See Fig. 31 .
6. Remove the bulkhead sound insulator. See Fig. 33 .
7. Remove the two brake pedal bracket bolts. See Fig. 37 .
8. Remove the brake pedal bracket/power booster nuts. See Fig. 32 .
9. To install, reverse removal procedure. Ensure the bulkhead sound insulator is not between the brake pedal
and bracket and the bulkhead. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .
2003 Ford Pickup F150
2002-04 BRAKES Disc & Drum - Blackwood, F150 Heritage Pickup & F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст