Ford F150 Pickup. Instruction — part 1107
Fig. 336: Installing Rocker Arms
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
CAUTION: Make sure the capscrew is installed. If it is missed, an
engine oil leak may occur.
NOTE:
The number 12 position is not part of the staged torque.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 337: Front Cover Bolt Tightening Sequence
Courtesy of FORD MOTOR CO.
40. Install the front cover.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Install the studs. Tighten to 7 Nm (62 lb-in).
Tighten the front cover bolts in the sequence shown in two stages:
Stage 1: Tighten the bolts to 28 Nm (21 lb-ft).
Fig. 338: Installing Front Crankshaft Oil Seal
Courtesy of FORD MOTOR CO.
41. Using the special tool, install the front crankshaft oil seal.
42. Install the crankshaft position sensor.
NOTE:
Lubricate the parts with clean engine oil prior to installation.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст