Ford F150 Pickup. Instruction — part 672
Fig. 80: Removing/Inspecting Boot For Damage
Courtesy of FORD MOTOR CO.
4. Inspect the lubricant on the driveshaft splines and in the driveshaft slip-yoke for contamination. If
contaminated, inspect the driveshaft splines and the driveshaft slip-yoke for wear. Install new components
as necessary.
Assembly
1. Position the new small driveshaft slip-yoke boot clamp on the driveshaft stub shaft.
2. Slide the small opening end of the slip-yoke boot on the driveshaft stub shaft, as far as it will travel.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Driveshaft & Universal Joints - F150 Pickup
Fig. 81: Installing Slip-Yoke Boot
Courtesy of FORD MOTOR CO.
3. Using the special tool, crimp the driveshaft slip-yoke boot clamp.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Driveshaft & Universal Joints - F150 Pickup
Fig. 82: Crimping Driveshaft Slip-Yoke Boot Clamp
Courtesy of FORD MOTOR CO.
4. Install the driveshaft slip-yoke on the driveshaft.
1. Pull the slip-yoke boot toward the driveshaft. Lubricate the driveshaft splines with approximately
10 grams (0.24 oz) of grease.
2. Position the new large slip-yoke boot clamp.
3. Align the blind splines, and install the driveshaft slip-yoke on the driveshaft.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Driveshaft & Universal Joints - F150 Pickup
Fig. 83: Aligning Blind Splines
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Driveshaft & Universal Joints - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст