Ford F150 Pickup. Instruction — part 578
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear - F150 Pickup
Fig. 109: Using Special Tool, Ensure That Differential Bearing Shims Are Fully Seated
Courtesy of FORD MOTOR CO.
15. Install the bearing caps and bearing cap bolts.
Fig. 110: Installing Bearing Caps & Bolts
Courtesy of FORD MOTOR CO.
16. Using the special tool, recheck the backlash.
z
For further adjustments, refer to DRIVELINE SYSTEM-GENERAL INFORMATION .
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear - F150 Pickup
Fig. 111: Rechecking Backlash
Courtesy of FORD MOTOR CO.
17. Install the axle shafts. For additional information, refer to AXLE SHAFT .
18. Fill the rear axle housing with 2.37 liters (5.5 pints) with the specified lubricant.
REMOVAL & INSTALLATION
AXLE HOUSING
Removal
1. Raise and support the vehicle. For additional information, refer to JACKING & HOISTING .
2. Remove the wheel and tire assembly. For additional information, refer to WHEELS & TIRES .
3. Mark the driveshaft flange and pinion flange.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear - F150 Pickup
Fig. 112: Marking Driveshaft Flange & Pinion Flange
Courtesy of FORD MOTOR CO.
4. Remove the four bolts.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст