Ford F150 Pickup. Instruction — part 625
Fig. 118: Removing Stabilizer-To-Axle Housing U-Bolts & Nuts
Courtesy of FORD MOTOR CO.
15. Support the axle housing with a transmission jack.
z
Use extra support straps as necessary.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
Fig. 119: Supporting Axle Housing
Courtesy of FORD MOTOR CO.
16. Remove the shock absorber bolts.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
Fig. 120: Removing Shock Absorber Bolts
Courtesy of FORD MOTOR CO.
17. Remove the rear spring plate U-bolts.
1. Remove the rear spring plate nuts.
2. Remove the two rear spring plate U-bolts.
3. Remove the rear spring plate.
4. Repeat the procedure for the other side.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
Fig. 121: Removing Rear Spring Plate
Courtesy of FORD MOTOR CO.
18. Lower the axle housing from the vehicle.
19. To install, reverse the removal procedure.
DISASSEMBLY & ASSEMBLY
DIFFERENTIAL CASE & RING GEAR - CONVENTIONAL
Special Tool(s)
CAUTION: The driveshaft centering socket yoke fits tightly on the rear axle
pinion flange pilot. To make sure that the yoke seats squarely on the
flange, tighten the bolts evenly in a cross pattern as shown.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 9.75-inch - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст