Ford F150 Pickup. Instruction — part 1668
Fig. 28: Removing Electronic Blend Door Actuator
Courtesy of FORD MOTOR CO.
Installation
All vehicles
1. Install the electronic blend door actuator.
1. Connect the actuator shaft.
2. Install the screws.
3. Connect the connector.
2003 Ford Pickup F150
2003 HVAC Control Components - F150 Pickup
Fig. 29: Installing Electronic Blend Door Actuator
Courtesy of FORD MOTOR CO.
2. Install the floor duct.
1. Install the floor duct.
2. Install the two screws (one each side).
2003 Ford Pickup F150
2003 HVAC Control Components - F150 Pickup
Fig. 30: Installing Floor Duct
Courtesy of FORD MOTOR CO.
Vehicles equipped with rear airflow duct
3. Zip-tie the rear airflow duct to floor duct.
2003 Ford Pickup F150
2003 HVAC Control Components - F150 Pickup
Fig. 31: Locating Zip-Tie
Courtesy of FORD MOTOR CO.
4. Reposition the carpet.
All vehicles
5. Install the RCM and bracket assembly.
WARNING:
The tightening torque of the restraints control module (RCM)
retaining bolts is critical for correct system operation.
2003 Ford Pickup F150
2003 HVAC Control Components - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст