Ford F150 Pickup. Instruction — part 570

Fig. 77: Holding Pinion Flange Using Special Tool
Courtesy of FORD MOTOR CO.

z

Install the differential case in the rear axle differential. For additional information, refer to
DIFFERENTIAL CASE .

z

If additional adjustments are necessary, refer to DRIVELINE SYSTEM-GENERAL
INFORMATION .

CAUTION: The driveshaft centering socket yoke fits tightly on the rear axle

pinion flange pilot. To make sure that the yoke seats squarely
on the flange, tighten the bolts evenly in a cross pattern as
shown.

2003 Ford Pickup F150

2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear - F150 Pickup

Fig. 78: Driveshaft Bolt Tightening Sequence
Courtesy of FORD MOTOR CO.

z

Install the driveshaft.

DIFFERENTIAL CASE

Special Tool(s)

2003 Ford Pickup F150

2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear - F150 Pickup

Fig. 79: Identifying Special Tool(s) (1 Of 2)
Courtesy of FORD MOTOR CO.

2003 Ford Pickup F150

2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear - F150 Pickup

Fig. 80: Identifying Special Tool(s) (1 Of 2)
Courtesy of FORD MOTOR CO.

Material

2003 Ford Pickup F150

2003 DRIVELINE/AXLES Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear - F150 Pickup