Ford F150 Pickup. Instruction — part 1261
Fig. 29: Disconnecting Accelerator Cable From Accelerator Pedal And Shaft
Courtesy of FORD MOTOR CO.
2. Depress the accelerator cable lock tabs on the inside of the passenger compartment and push the
accelerator cable into the engine compartment.
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Acceleration Control - F150 Pickup
Fig. 30: pushing accelerator cable into engine compartment
Courtesy of FORD MOTOR CO.
3. Remove the accelerator cable.
1. Rotate the throttle lever forward.
2. Slide the accelerator cable end from the throttle lever.
3. Depress the accelerator cable lock tabs and remove the accelerator cable from the accelerator cable
bracket.
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Acceleration Control - F150 Pickup
Fig. 31: Removing Accelerator Cable
Courtesy of FORD MOTOR CO.
4. To install, reverse the removal procedure.
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Acceleration Control - F150 Pickup
2003 ENGINE PERFORMANCE
Removal & Installation - F150 Pickup - Bi-Fuel - Gasoline/CNG
INTRODUCTION
The 5.4L engine is available with two bi-fuel options, Liquid Propane Gas (LPG) or Compressed Natural Gas
(CNG). The fuel control system on these engines is separate from the gasoline fuel system and has unique parts.
This article only covers removal and installation procedures for alternate fuel components on CNG bi-fuel
vehicles. For alternate fuel components on LPG bi-fuel vehicles, see REMOVAL & INSTALLATION - F150
PICKUP - BI-FUEL - GASOLINE/LPG article. Procedures for systems and components that are the same as
gasoline powered models are not included in either article. See REMOVAL & INSTALLATION -
BLACKWOOD, EXPEDITION, F150 PICKUP & NAVIGATOR article. Alternate fuel powered vehicles
utilize special fuel filler valve, fuel tanks, fuel pressure regulator, coalescent filter assembly, fuel lines, fuel rails
and fuel injectors.
COMPONENT LOCATIONS
COMPONENT LOCATIONS
BI-FUEL COMPONENT LOCATIONS
COMPUTERIZED ENGINE CONTROLS
ALTERNATE FUEL CONTROL MODULE
Removal & Installation
NOTE:
For component locations, see BI-FUEL COMPONENT LOCATIONS table.
Application
Location
ALT Fuel Switch
On Instrument Panel
Alternate Fuel Control Module
Right Front Of Engine Compartment
Coalescent Filter
Under Vehicle, On Frame Rail
Fuel Pressure Regulator
Next To Coalescent Filter
Fuel Rail Pressure Sensor
On Fuel Rail
Fuel Rail Temperature Sensor
On Fuel Rail
Fuel Tank Pressure Sensor
On Fuel Pressure Regulator
Fuel Tank Solenoid(s)
On Each Fuel Cylinder
Fuel Tank Temperature Sensor
On Fuel Tank
Power Distribution Box
On Left Side Of Engine Compartment
NOTE:
Numbers in parenthesis refer to numbers in illustration.
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - F150 Pickup - Bi-Fuel - Gasoline/CNG
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - F150 Pickup - Bi-Fuel - Gasoline/CNG
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст