Ford F150 Pickup. Instruction — part 466
Fig. 39: Aligning Index-Marks
Courtesy of FORD MOTOR CO.
6. Install the front differential support.
Fig. 40: Installing Front Differential Support
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Courtesy of FORD MOTOR CO.
7. Check and, if necessary, fill the differential.
z
Use Motorcraft SAE 75W-90 Premium 4x4 Front Axle Lubricant XY-75W90-TQL or equivalent
meeting Ford specification WSP-M2C201-A.
8. Lower the vehicle.
REMOVAL AND INSTALLATION
AXLE ASSEMBLY - FRONT DRIVE
Removal
1. With the transmission in Neutral, raise and support the vehicle. For additional information, refer to
JACKING & HOISTING .
2. Index-mark the front driveshaft to the axle universal joint flange (4858).
Fig. 41: Front Driveshaft To Axle Universal Joint Flange Index-Marks
Courtesy of FORD MOTOR CO.
CAUTION: Do not allow the driveshaft to hang unsupported.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Fig. 42: Removing Front Driveshaft
Courtesy of FORD MOTOR CO.
3. Disconnect and support the front driveshaft.
1. Remove the four bolts.
2. Carefully disconnect and support the front driveshaft.
CAUTION: Do not allow the halfshaft to hang unsupported.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Fig. 43: Disconnecting Front Drive Halfshaft
Courtesy of FORD MOTOR CO.
4. Remove the six bolts and disconnect the front drive halfshaft.
z
Repeat Step 4 for the opposite side.
5. Disconnect the vacuum lines and the front axle vent tube.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст