Ford F150 Pickup. Instruction — part 844
Fig. 289: Installing Idler Support Bracket - Supercharged Engines
Courtesy of FORD MOTOR CO.
All Vehicles
7. Raise and support the vehicle. For additional information, refer to JACKING &
HOISTING .
8. Install a new crankshaft front oil seal. For additional information, refer to CRANKSHAFT
FRONT SEAL .
9. Loosely install the bolts, then tighten the bolts in two stages, in the sequence shown.
Stage 1: Tighten to 20 Nm (15 lb-ft).
Stage 2: Tighten an additional 60 degrees.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Fig. 290: Front Oil Pan Bolt Tightening Sequence
Courtesy of FORD MOTOR CO.
10. Connect the CKP sensor electrical connector.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Fig. 291: Connecting CKP Sensor Electrical Connector
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст