Ford F150 Pickup. Instruction — part 1770
Fig. 134: Installing Lock Cylinder Housing Screws
Courtesy of FORD MOTOR CO.
12. Install the turn signal cancel cam.
2003 Ford Pickup F150
2003 STEERING Steering Column - F150 Pickup
Fig. 135: Installing Turn Signal Cancel Cam
Courtesy of FORD MOTOR CO.
NOTE:
Lubricate the lock cylinder housing bushings with ignition lock grease.
2003 Ford Pickup F150
2003 STEERING Steering Column - F150 Pickup
Fig. 136: Positioning Steering Column Lock Cylinder Housing & Steering Column Shaft On
Steering Actuator Housing
Courtesy of FORD MOTOR CO.
13. Position the steering column lock cylinder housing and the steering column shaft on the steering actuator
housing.
z
Make sure the upper and lower steering column lock actuators are aligned.
14. Position the steering column locking levers (3B661) on the steering actuator housing.
1. Use a shop fabricated tool.
2. On tilt steering columns, install and compress the steering column position spring.
Fig. 137: Installing Steering Column Locking Levers On Steering Actuator Housing
Courtesy of FORD MOTOR CO.
15. Tighten the lock cylinder housing screws.
2003 Ford Pickup F150
2003 STEERING Steering Column - F150 Pickup
Fig. 138: Tightening Lock Cylinder Housing Screws
Courtesy of FORD MOTOR CO.
16. Install the steering column bearing tolerance ring.
2003 Ford Pickup F150
2003 STEERING Steering Column - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст