Ford Falcon. Manual — part 342
413-08-11 Interior
Command
Centre 413-08-11
DIAGNOSIS AND TESTING (Continued)
Service Procedures
Service Procedure
Description
Illumination fault (Test A)
Identifies an illumination fault.
Climate control button not working (Test B)
Tests the ICC climate buttons and knobs for correct
operation and identifies a fault.
Auxiliary switch fault (Test C)
Tests the ICC auxiliary buttons for correct operation
and identifies a fault.
ICC visual damage (Test D)
Visual inspection of ICC for physical damage.
ICC display fault (Test E)
Checks the ICC for correct display operation and
identifies a fault.
Unusual noise from ICC (Test F)
Checks for any unusual noises or rattles from the
ICC.
Faulty air register (Test G)
Tests the air registers for correct operation.
TEST A : ILLUMINATION FAULT
Using the WDS data logger function activate the
following acronyms.
RUN_POS, ACC_POS, POWER_SW
Test Step
Result/Action to Take
Acronyms
A1
Turn the ignition on.
Yes
RUN_POS
Check Pid’s using data logger.
Go to A2.
Is the ignition on?
No
Repair faulty ignition
system and retest.
A2
Check that the accessories are on.
Yes
Check Pid’s using data logger.
Go to A3.
Are the accessories on?
No
Repair faulty ignition
system and retest.
A3
Check to see if the ICC audio is turned on.
Yes
POWER_SW
Is the audio on?
Go to A5.
No
Go to A4.
A4
Push the ICC audio power button.
Yes
POWER_SW
Check Pid’s using data logger.
Go to A5
Does the ICC audio turn on?
No
Refer to symptom ICC
does not turn on in the
symptom chart of audio
chapter 415-00.
A5
Turn the vehicle headlights on.
Yes
Are the headlights on?
Go to A6.
No
Repair faulty lighting
system.
G86737 en
413-08-12 Interior
Command
Centre 413-08-12
DIAGNOSIS AND TESTING (Continued)
Test Step
Result/Action to Take
Acronyms
A6
Check for illumination of the ICC display.
Yes
Does the display illuminate?
Go to A8
No
Continue.
A7
Remove the ICC.
Yes
Measure for battery voltage at the ICC instrument
Replace ICC and retest.
panel connector illumination pins.
No
Refer to wiring diagrams.
Repair faulty vehicle
Does the battery voltage appear?
illumination wiring.
A8
Check for illumination of the ICC switches.
Yes
Do all the switches illuminate?
No fault. ICC functioning
correctly.
No
Continue.
A9
Check for illumination of the ICC switches.
Yes
Do any switches illuminate.
Replace ICC and retest.
No
Continue.
A10
Check for illumination of the vehicle instrument
Yes
panel.
Go to A14.
Does the instrument panel illuminate?
No
Continue.
A11
Inspect the instrument panel illumination fuse.
Yes
Is the fuse blown?
Go to A12.
No
Go to A14.
A12
Turn the headlights off and replace the blown
Yes
instrument panel illumination fuse with a new one of Go to A13.
correct value.
No
Turn the headlights on.
Go to A1 and retest.
A13
Remove the ICC.
Yes
Turn the headlights off and replace the blown
ICC is OK. Repair faulty
instrument panel illumination fuse with a new one of vehicle wiring and retest.
correct value.
No
Turn the headlights on.
Replace ICC and retest.
Did the fuse blow?
A14
Remove the ICC.
Yes
Measure for battery voltage at the ICC instrument
Replace ICC and retest.
panel connector illumination pins.
No
Refer to wiring diagrams.
Repair faulty vehicle
Does the battery voltage appear?
illumination wiring.
G86737 en
413-08-13 Interior
Command
Centre 413-08-13
DIAGNOSIS AND TESTING (Continued)
BLWR_FAN, AC_SEL_SW, PANEL_FLR, FLR_DEF,
TEST B : CLIMATE CONTROL BUTTON NOT
FLOOR, PANEL_FACE, DEF_SCRN, AUTO, OFF,
WORKING
RECIRC, RECIRC, FAN_MINUS, FAN_PLUS,
Using the WDS data logger function activate the
TEMP_DECR, TEMP_INCR, REAR_DEF,
following acronyms.
PTMP_DECR, PTMP_DECR, PTMP_INCR,
RUN_POS, ACC_POS, POWER_SW, TEMPKNOB,
MODE_UP, MODE_DWN
Test Step
Result/Action to Take
Acronyms
B1
Turn the ignition on.
Yes
RUN_POS
Check Pid’s using data logger.
Go to B2
Is the ignition on?
No
Repair faulty ignition
system and retest.
B2
Check that the accessories are on.
Yes
ACC_POS
Check Pid’s using data logger.
Go to B3
Are the accessories on?
No
Repair faulty ignition
system and retest.
B3
Check to see if the ICC audio is turned on.
Yes
Is the audio on?
Go to B5
No
Go to B4
B4
Push the ICC audio power button.Check Pid’s
Yes
using data logger.
Go to B5
Does the ICC audio turn on?
No
Refer to symptom ICC
does not turn on in the
symptom chart of audio
chapter 415-00
B5
Operate each climate control switch / knob.
Yes
Are any switches / knobs sticking or stuck?
Replace ICC and retest.
No
Continue.
G86737 en
413-08-14 Interior
Command
Centre 413-08-14
DIAGNOSIS AND TESTING (Continued)
Test Step
Result/Action to Take
Acronyms
B6
Check that each climate control switch / knob
Yes
TEMPKNOB,
operates.
Go to B7
BLWR_FAN,
Check Pid’s using data logger.
No
AC_SEL_SW,
Does each switch / knob operate?
Replace ICC and retest.
PANEL_FLR,
FLR_DEF,
FLOOR,
PANEL_FACE,
DEF_SCRN,
AUTO, OFF,
RECIRC,
FAN_MINUS,
FAN_PLUS,
TEMP_DECR,
TEMP_INCR,
REAR_DEF,
PTMP_DECR,
PTMP_INCR,
MODE_UP,
MODE_DWN,
B7
Control the following Pid’s using the WDS data
Yes
As per acronym
logger function.
No fault.ICC functioning
list step B6.
Check for correct function operation for each switch correctly.
/ knob.
No
Do all functions operate?
Replace ICC and retest.
TEST C : AUXILIARY FAULT
Using the WDS data logger function activate the
following acronyms.
RUN_POS, ACC_POS, POWER_SW, TCSW,
C_LOCK_SW, DOME_SW, TRIP_SW
Test Step
Result/Action to Take
Acronyms
C1
Turn the ignition on.
Yes
RUN_POS
Check Pid’s using data logger.
Go to C2
Is the ignition on?
No
Go to C2
C2
Check that the accessories are on.
Yes
ACC_POS
Are the accessories on?
Go to C3
No
Repair faulty ignition
system and retest.
C3
Check to see if the ICC audio is turned on.
Yes
Is the audio on?
Go to C5
No
Go to C4
G86737 en
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст