Ford Falcon. Manual — part 509
501-29-12
Side Panel Sheet Metal Repairs
501-29-12
WELD INFORMATION (Continued)
G00001 en
501-29-13
Side Panel Sheet Metal Repairs
501-29-13
WELD INFORMATION (Continued)
Side Impact Crash Sensor Bracket
The side impact crash sensor bracket must be
replaced if damaged. It MUST NOT be straightened or
panel beaten. This is critical for correct function of the
crash severity sensor which plays a major part in
activating the side impact airbags in a crash. In the
event of having to replace the side impact sensor
bracket, the bracket should be spotwelded in six
places to the Full Length Reinforcement (Item 1 in the
illustration). If a spotwelder is not available, it is then
necessary to drill three 4mm diameter holes on each
flange of the bracket, (6 in total) and puddle MIG weld
to fill the holes and fuse with the full length
reinforcement.
G00001 en
501-29-14
Side Panel Sheet Metal Repairs
501-29-14
WELD INFORMATION (Continued)
G00001 en
501-29-15
Side Panel Sheet Metal Repairs
501-29-15
WELD INFORMATION (Continued)
G00001 en
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст