Ford Falcon. Manual — part 45
205-02A-4
Rear Drive Axle / Differential — Beam Axle
205-02A-4
DESCRIPTION AND OPERATION (Continued)
Differential Assembly and Pinion
Bearings
This bearing is a single row, pre-set tapered roller
bearing capable of accepting thrust loads and radial
loads in any combination.
The tapered roller bearing consists of four basic parts:
the cup or outer race, the cone or inner race, the
tapered rollers which roll freely between the cup and
cone, and the cage which serves as a retainer to
maintain the proper spacing between the tapered
rollers grouped around the cone.
Wheel Bearings
This bearing is a single row, pre-set tapered roller
bearing capable of accepting thrust loads in either
direction and radial loads in any combination.
The tapered roller bearing consists of five basic parts:
the cup or outer race, the cup rib ring, the cone or
inner race, the tapered rollers which roll freely
between the cup and cone, and the cage which
serves as a retainer to maintain the proper spacing
between the tapered rollers grouped around the cone.
When the bearing is manufactured, the cup and rib
ring are bonded together with an adhesive to facilitate
bearing handling and installation. Since the cup and
rib ring are clamped together in the axle housing,
there is no need for a permanent bond. When the
bearing is serviced the cup will usually be separated
from the rib ring.
Item
Description
1
Cup
2
Cup rib ring
3
Rollers
4
Cone
5
Cage
G98771 en
205-02A-5
Rear Drive Axle / Differential — Beam Axle
205-02A-5
DESCRIPTION AND OPERATION (Continued)
M86 Beam Rear Axle Assembly
G98771 en
205-02A-6
Rear Drive Axle / Differential — Beam Axle
205-02A-6
DESCRIPTION AND OPERATION (Continued)
Item
Description
1
Axle & brake retaining bolt (8 off)
2
Park brake assembly
3
Inner bearing retainer
4
Axle shaft oil seal
5
Axle shaft wheel bearing
6
Outer bearing retainer
7
ABS tone wheel
8
Wheel Stud (5 off each side)
9
Axle shaft
10
Differential bearing cap bolts (4 off)
11
Differential bearing caps (2 off)
12
Carrier and tube assembly
13
Filler plug & gasket
14
Drain Plug
15
Lubricant tag
16
Rear cover
17
Differential position shim
18
Differential bearing (cup and cone)
19
Ring gear bolt (8 off)
20
Differential case
21
Rear pinion bearing (cup & cone)
22
Pinion position shim
23
Collapsible preload control spacer
24
Front pinion bearing (cup & cone)
25
Pinion oil seal
26
Companion flange assembly
27
Pinion nut
28
Hypoid gearset (Ring gear & pinion)
29
Load level bracket
30
Park brake cable clips (2 off)
31
Rear cover bolts
G98771 en
205-02A-7
Rear Drive Axle / Differential — Beam Axle
205-02A-7
DESCRIPTION AND OPERATION (Continued)
M78 Beam Rear Axle Assembly
G98771 en
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст