Ford Taurus X (2009 year). Manual — part 12

DVD player controls

1. Headphone control A/B: Press
to select either the A or B
headphone source. Then press
MEDIA to select the desired playing
media for that headset. When a
headphone channel has been selected (A or B), selections will affect the
source on that channel only.
Note: Headphone A can access any possible media (AM, FM1, FM2, SAT
(if equipped), CD, DVD, DVD-AUX). Headphone B can only access DVD
and DVD-AUX.
For further information, refer to Single play/Dual play later in this
section.

2.

/

(Stop/Eject): Press

once to stop and press a second
time to eject a disc from the DVD
system.

3.

(Reverse): Press and

release for the previous chapter or
track. Press and hold to reverse
search a DVD, Video CD, or FES CD in DVD/CD mode.

A

B

VIDEO

VOLUME

MEDIA

RETURN

MENU

ENTER

1

7

2

3

4

5

6

9

10

11

12

13

14

15

16

8

Entertainment Systems

50

4.

(Fast forward): Press and

release for the next chapter or
track. Press and hold to forward
search a DVD, Video CD, or FES CD in DVD/CD mode.

5.

/

(Play/Pause): Press

(Play) to select DVD mode (and to
turn the DVD system on if it is off).
If a disc is present, it will resume or begin to play. Press (Pause) while
playing a disc to pause a DVD or CD.

6. On/Off: Press to turn the DVD
system On/Off.

7. VIDEO: Press repeatedly to cycle
through the following video state
options which will be indicated on
the bottom right hand corner of the
display: DVD DISC, DVD-AUX,
NON-DVD and Off (no indicator). If you select the DVD-AUX video
source, the display will turn off if there is no video signal detected. When
a video signal is detected on the auxiliary video input, and the display is
in the DVD-AUX video mode, the display will automatically turn on.

8. Infrared (IR) Receiver & Transmitter: System sensor which reads
the signals from the remote control and sends audio signals to the
infrared (IR) wireless headphones.

9. LCD screen: The eight inch diagonal screen rotates down to view and
up into housing to store when not in use. Ensure that the screen is
latched into the housing when being stored.

10. Volume: If your vehicle is
equipped with a navigation system,
this function is only available when
in dual play mode. For all other
vehicles, when in single play mode,
press to increase (

) or decrease (

) the volume over all speakers.

When in Dual Play, press to increase (

) or decrease (

) the volume

for the wired headphones. (Wireless headphone volume is controlled
with the rotary dial on the right ear piece.)

Entertainment Systems

51

11.

/

(Headphones/Speakers): Press once for Dual Play

(Headphone mode- the rear speakers are muted) and press again for
Single Play (same media playing through all speakers). You can also
press the 2 and 4 memory preset buttons on the audio system at the
same time to perform the same function. For further interaction
information, refer to Single Play/Dual play under Operation later in
this section.

12. MEDIA: Press repeatedly to
select from the various possible
playing media sources (AM, FM1,
FM2, SAT (if equipped), CD, DVD, DVD-AUX). The media will show in
the status display on the top of the screen when in Dual Play mode.
When in Single Play mode, the media source will be displayed on the
radio.
Note: Channel A can access any possible media source (AM, FM1, FM2,
SAT (if equipped), CD, DVD, DVD-AUX). Channel B can only access
DVD and DVD-AUX sources.

13. RETURN: Press to return to the
playing media or to resume
playback.

14. MENU: When playing a DVD,
press MENU once to enter the DVD
disc menu (if available) and press
twice to enter the system set-up menu. From the set-up menu, you may
select from Angle, Aspect Ratio, Language, Subtitles, Disc resume,
Compression, Restore Defaults and Back. For more detailed information,
refer to Menu mode.

15. ENTER: Press to select/confirm
the current selection.

16. Cursor /Brightness controls:
Use the cursor controls to make
various selections when in any
menu. When not in a menu, and in
DVD mode, press

/

to adjust

the brightness. A display bar will appear at the bottom of the screen
indicating the brightness levels.
Remote control
Unless otherwise stated, all operations can be carried out with the
remote control. Always point the remote control directly at the player.
Ensure that there are no obstructions between the remote and player.

Entertainment Systems

52

1. Power control: Press to turn the FES (Family Entertainment
System) ON/OFF.

2. Cursor controls: Use in various active menus to advance the cursor
up/down/left/right. When not in a Menu, the left and right cursor controls
decrease and increase the display brightness.

3. DISPLAY: Press to access the on-screen display of the FES functions
and adjustments.

4. RETURN: Press to return to the previous menu screen.

5. ANGLE (DVD dependent): Press to select the angle to view the
scene.

6. Channel A/B: Press to select either A or B headphones and then use
the MEDIA control to select the desired playing media for the
headphones.

7. VOL (Volume): When in Single Play, press to increase (

) or

decrease (

) the volume over all speakers. When in Dual Play, press to

increase (

) or decrease (

) the volume for the wired headphones.

(Wireless headphone volume is controlled with the rotary dial on the
right ear piece.)

Entertainment Systems

53