Ford Probe (1997 year). Manual — part 11
49
NOTE:
Any cleaner or polish that increases the
gloss (shine) of the upper part of the
instrument panel should be avoided.
The dull finish in this area is to help
protect the driver from undesirable
windshield reflection.
The Climate Control System
Heating Only System (Without Air
Conditioning)
Function selection
The heater in your vehicle has three controls
used for air direction, temperature and fan
speed. The function selector control lets you
direct heated or unheated air through the
instrument panel registers, or down to the floor.
It also allows you to vent your vehicle with
outside air.
Heating only system control panel
Turning the function selector control all the way
to the right (
V
) directs air to defroster vents
and the side window defoggers only.
With the function selector control in the MIX
position, air is directed out the defrosters, side
defoggers and the floor heater outlets.
50
The FLOOR position directs air out the floor
outlets and the side window defoggers.
Ventilate your vehicle with outside air by
choosing the VENT position.
Temperature control
The air temperature can be adjusted by moving
the marker on the temperature control to the red
area for warm air, or to the blue area for
unheated air. The air will become warmer or
cooler depending on how far the control is
turned.
Fan speed control
Fan speed can be controlled by turning the
control from LO to HI.
Turning On the Heat
To heat the inside of your vehicle:
1.
Turn the function selector control to FLOOR.
When FLOOR is selected, air is directed
through the floor registers, and a little air is
also directed at the windshield and side
windows to help prevent fogging.
2.
Turn the temperature control all the way to
the right in the red area, or to the desired
temperature.
3.
Set the fan at the desired speed.
51
Defrosting the Windshield and Side
Windows
1.
Turn the function selector control to the
defrost position.
When
V
is selected, air is directed to the
windshield and side windows.
2.
Turn the temperature control to the desired
temperature.
3.
Set the fan at the desired speed.
Heating and Defrosting at the Same Time
1.
Set the function selector control to MIX.
2.
Set the temperature and fan speed as
desired.
Ventilating Your Vehicle With Outside Air
On mild days, you may want to ventilate your
vehicle with outside air. To open the vents:
1.
Turn the function selector control to VENT.
When VENT is selected, air is directed out of
the panel registers.
2.
Turn the temperature control to the desired
temperature.
3.
Set the
H
(fan speed) as desired.
52
Tips for controlling the temperature in your
vehicle
❑
To vary the temperature inside your vehicle,
move the temperature selector toward the red
area for warmer air and toward the blue area
for cooler air.
❑
If you drive with the fan off and the
windows closed, the windows may fog up.
To prevent fogging:
1.
Set the function selector control to VENT,
MIX, FLOOR or the
V
position.
2.
Set the desired temperature.
3.
Set the
H
(fan speed) to the desired
position.
❑
Do not put objects under the front seats that
will interfere with the flow of air to the back
seats.
❑
Remove any snow, ice, or leaves from the
area below the windshield on the outside of
your vehicle. They could block the air intake.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст