Ford Probe (1997 year). Manual — part 27
113
Safety Seats for Children
Use a safety belt that is recommended for the
size and weight of the child. Always follow the
safety seat manufacturer’s instructions when
installing and using the safety seat.
Ford recommends the use of a child safety seat
having a top tether strap. Install the child safety
seat in a seating position which is capable of
providing a tether anchorage. For more
information on top tether straps see
Attaching
Safety Seats With Tether Straps
in this chapter.
When installing a child safety seat, be sure to
use the correct safety belt buckle for that seating
position, and make sure the tongue is securely
fastened in the buckle. For a shoulder/lap belt
combination with a sliding tongue, make sure
the retractor is in the automatic locking mode.
R
WARNING
When using forward-facing child seats
move the passenger seat as far back from
the instrument panel as possible. Never
secure rear-facing child seats or infant
carriers in the front seat.
The force of the rapidly inflating passenger air
bag could push the top of the rear-facing seat
against the vehicle seatback, armrests or console.
Rear-facing infant seats must always be secured
in the rear seat.
All child restraint systems are designed to be
secured in vehicle seats by lap belts or by the
lap portion of a lap-shoulder belt.
114
R
WARNING
If you do not properly secure the safety
seat, the child occupying the seat may be
injured during a collision or sudden stop.
An unsecured safety seat could also injure
other passengers.
R
WARNING
Carefully follow all of the manufacturer’s
instructions included with the safety seat
you put in your vehicle. If you do not
install and use the safety seat properly,
the child may be injured in a sudden stop
or collision.
Installing Child Safety Seats
Your vehicle is equipped with a dual locking
mode retractor on the shoulder belt portion of
the front passenger seat and both rear seats. The
automatic locking mode
must be used
when
installing a child seat or infant carrier in the
front passenger seat or rear seats.
R
WARNING
Rear-facing child seats or infant carriers
should never be placed in the front seats.
115
If you choose to install a child safety seat in the
front seat, move the seat as far back as possible.
1.
Position the child seat or infant carrier on
the passenger seat of the vehicle.
2.
Pull down on the shoulder belt, then grasp
the shoulder belt and lap belt together.
Grasping lap and shoulder belt together
116
3.
While holding the shoulder and lap belt
portions together, route the tongue through
the child seat according to the child seat
manufacturer’s instructions. Be sure the belt
webbing is not twisted.
Routing safety belt through child seat or infant carrier
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст