Ford Super Duty (2017 year). Manual — part 58

When shifting the transmission out of
reverse (R) and into any gear other than
park (P), the camera image remains in the
display until:
•

Your vehicle speed sufficiently
increases.

•

You shift your vehicle into park (P).

•

You apply the parking brake on vehicles
with a manual transmission.

360 DEGREE CAMERA

(If Equipped)

WARNINGS

The 360 degree camera system still
requires the driver to use it in
conjunction with looking out of the

windows, and checking the interior and
exterior mirrors for maximum coverage.

Objects that are close to either
corner of the bumper or under the
bumper, might not be seen on the

screen due to the limited coverage of the
camera system.

Use caution when turning camera
features on or off when the
transmission is not in park (P). Make

sure your vehicle is not moving.

Note: The 360 degree camera system turns
off when your vehicle is in motion at low
speed, except when in reverse (R).

The 360 degree camera system consists
of front, side and rear cameras. The
system:
•

Allows you to see what is directly in
front or behind your vehicle.

•

Provides cross traffic view in front and
behind your vehicle.

•

Allows you to see a top-down view of
the area outside your vehicle, including
the blind spots.

•

Provides visibility around your vehicle
to you in parking maneuvers such as:
•

Centering in a parking space.

•

Obstacles near vehicle.

•

Parallel parking.

Camera Views

E205884

The camera button is located on
the instrument panel and allows
you to toggle through different

camera views.

When in park (P), neutral (N) or drive (D),
only images from the front cameras are
displayed. Press the camera button to
display the front camera image on the
display screen.

When in reverse (R), only images from the
rear cameras are displayed. When you shift
into reverse (R), the rear view camera
image automatically shows on the display
screen.

Advanced Camera Views

(If Equipped)

E233726

Additional camera views may be
available for vehicles with
specific features. Press the small

camera icon shown on the top left corner
of the display screen to open the camera
view menu.

235

The following camera views can be
accessed in park (P), neutral (N) or drive
(D) when you press the camera button:
•

Front 360 + Normal: Contains the
normal front camera view next to a
360 degree camera view.

•

Front Normal View: Provides an
image of what is directly in front of your
vehicle.

•

Front Split View: Provides an
extended view of what is in front of
your vehicle by using the front and side
cameras.

The following camera views can be
accessed when you shift into reverse (R):
•

Rear 360 + Normal: Contains the
normal rear camera view next to a 360
degree camera view. Press the zoom
(+) button to quickly access Rear
Normal View from this screen.

•

Rear Normal View: Provides an image
of what is directly behind your vehicle.

•

Rear Split View: Provides an
extended view of what is behind your
vehicle by using the rear and side
cameras.

•

Rear High View: Provides an image
of your truck bed and can be used to
assist you when backing up to align and
hitch a fifth wheel or gooseneck trailer.

•

Auxiliary View: Provides a rear view
image from the back of your trailer
while reversing.

•

Trailer Reverse Guidance View:
Provides an image of the rear of your
vehicle using the side cameras, useful
when reversing with a trailer. Use the
arrows at the bottom of the screen to
adjust the side camera position.

Keep Out Zone

E184448

The Keep Out Zone is represented by the
yellow dotted lines running parallel to your
vehicle. It is designed to give you the
indication on the ground of the fully
extended outside mirror position.

Front Camera

WARNING

The front camera system still
requires the driver to use it in
conjunction with looking out of your

vehicle.

E184044

236

The front video camera, located in the
grille, provides a video image of the area
in front of your vehicle. It adds assistance
to the driver while driving forward at low
speeds. To use the front video camera
system, place the transmission in any gear
except reverse (R). An image will display
once the camera enable button is pressed.
The area displayed on the screen may vary
according to your vehicle's orientation
and/or road condition.

Side Camera

E231401

The side view camera, located in the
outside mirror, provide a video image of
the area on the sides of your vehicle as part
of the front 360 + normal view and rear
360 + normal view. It aids you while
parking your vehicle either forward or
backwards.

Note: Use caution when using the 360 view
while any of the doors are ajar. If a door is
ajar, the camera will be out of position and
the video image may be incorrect.

Center High-Mount Stop Lamp
Camera

(If Equipped)

E231402

The center high-mount stop lamp camera
system is a variant of the rear view camera
that is mounted within the high-mount
stop lamp. It is designed to display the
contents of your truck bed or assist you
when backing up to align and hitch a fifth
wheel or gooseneck trailer. The center
high-mount stop lamp camera is not
meant as an alternative to the rear view
camera.

E233763

The center high-mount stop lamp camera
view contains a guideline to help you
locate the center of your vehicle. This view
can only be accessed while in reverse (R).

237

Auxiliary Camera

(If Equipped)

Note: The auxiliary camera works with
trailers up to 50 ft (15 m) in length.

E233727

Access the auxiliary camera view
by pressing the button on the
display screen when in reverse

(R).

The auxiliary camera system is a variant
of the rear view camera, comprised of a
camera with a built in amplifier. It is
designed to display a rear view image from
the back of a trailer while reversing. The
auxiliary camera is not meant as an
alternative to the rear view camera.

238