Ford Super Duty (2017 year). Manual — part 9

Rear outboard inflatable seatbelts
(second row only– if equipped)

E146363

1.

Buckle the combination lap and
shoulder belt.

2. Grasp the lap portion of the belt and

pull upward until the entire belt is
pulled out.

3. Allow the belt to retract. As the belt

retracts, you will hear a clicking sound.
This indicates the seatbelt is now in the
automatic locking mode.

How to Disengage the Automatic
Locking Mode

Unbuckle the combination lap and
shoulder belt and allow it to retract
completely to disengage the automatic
locking mode and activate the vehicle
sensitive (emergency) locking mode.

Rear Inflatable Seatbelt

(If Equipped)

WARNING

Do not attempt to service, repair, or
modify the rear inflatable seatbelt.

The rear inflatable seatbelts are fitted in
the shoulder portion of the seatbelts of the
second-row outboard seating positions.

Note: The rear inflatable seatbelts are
compatible with most infant and child
safety car seats and belt positioning booster
seats when properly installed. This is
because they are designed to fill with a
cooled gas at a lower pressure and at a
slower rate than traditional airbags. After
inflation, the shoulder portion of the
seatbelt remains cool to the touch.

The rear inflatable seatbelt consists of the
following:
•

An inflatable bag located in the
shoulder seatbelt webbing.

•

Lap seatbelt webbing with automatic
locking mode.

•

The same warning light, electronic
control and diagnostic unit as used for
the front seatbelts.

•

Impact sensors located in various parts
of the vehicle.

How does the rear inflatable seatbelt
system work?

The rear inflatable seatbelts will function
like standard restraints in everyday usage.

E146364

During a crash of sufficient force, the
inflatable belt will inflate from inside the
webbing.

39

E146365

The fully inflated belt's increased diameter
more effectively holds the occupant in the
appropriate seating position, and spreads
crash forces over more area of the body
than regular seatbelts. This helps reduce
pressure on the chest and helps control
head and neck motion for passengers.

WARNING

If the rear inflatable seatbelt has
deployed, it will not function again.
The rear inflatable seatbelt system

must be replaced by an authorized dealer.

The rear inflatable seatbelts are designed
to inflate in frontal or near-frontal crashes,
rollovers and some side impact crashes.
The fact that the rear inflatable seatbelt
did not inflate in a crash does not mean
that something is wrong with the system.
Rather, it means the forces were not of the
type sufficient to cause activation.

SEATBELT HEIGHT
ADJUSTMENT

WARNING

Position the safety belt height
adjuster so that the belt rests across
the middle of your shoulder. Failure

to adjust the safety belt properly could
reduce the effectiveness of the safety belt
and increase the risk of injury in a crash.

E145664

Adjust the height of the shoulder belt so
the belt rests across the middle of your
shoulder.

To adjust the shoulder belt height:

1.

Pull the button and slide the height
adjuster up or down.

2. Release the button and pull down on

the height adjuster to make sure it is
locked in place.

SEATBELT WARNING LAMP
AND INDICATOR CHIME

This lamp illuminates and an
audible warning will sound if the
driver's safety belt has not been

fastened when the vehicle's ignition is
turned on.

40

Conditions of operation

Then...

If...

The safety belt warning light illuminates 1-

2 minutes and the warning chime sounds

4-8 seconds.

The driver's safety belt is not buckled

before the ignition switch is turned to the

on position...

The safety belt warning light and warning

chime turn off.

The driver's safety belt is buckled while the

indicator light is illuminated and the

warning chime is sounding...

The safety belt warning light and indicator

chime remain off.

The driver's safety belt is buckled before

the ignition switch is turned to the on posi-

tion...

SEATBELT REMINDER

Belt-Minder™

This feature supplements the seatbelt
warning function. It provides additional
reminders by intermittently sounding a
chime and illuminating the seatbelt
warning light when you are in the driver
seat and a seatbelt is unbuckled.

Then...

If...

The Belt-Minder feature will not activate.

You buckle your seatbelt before you switch

the ignition on or less than 1-2 minutes

elapse after you switch the ignition on...

The Belt-Minder feature activates - the

seatbelt warning light illuminates and a

warning tone sounds for six seconds every

25 seconds, repeating for about five

minutes or until you buckle your seatbelt.

You do not buckle your seatbelt before your

vehicle reaches at least 6 mph (9.7 km/h)

and 1-2 minutes elapse after you switch the

ignition on...

The Belt-Minder feature activates - the

seatbelt warning light illuminates and the

warning tone sounds for six seconds every

25 seconds, repeating for about five

minutes or until you buckle your seatbelt.

The driver seatbelt is unbuckled for about

one minute while the vehicle is traveling at

least 6 mph (9.7 km/h) and more than 1-2

minutes elapse after you switch the ignition

on...

41

Deactivating and Activating the
Belt-Minder Feature (Driver only)

WARNING

While the system allows you to
deactivate it, this system is designed
to improve your chances of being

safely belted and surviving an accident.
We recommend you leave the system
activated for yourself and others who may
use the vehicle. To reduce the risk of injury,
do not deactivate or activate the system
while driving the vehicle.

Note: If you are using MyKey, you cannot
disable the Belt-Minder. Also, if the
Belt-Minder has been previously disabled,
it will be re-enabled during the use of
MyKey. See MyKey™ (page 61).

Read Steps 1 - 4 thoroughly before
proceeding with the programming
procedure.

Before following the procedure, make sure
that:
•

The parking brake is set.

•

The transmission is in park (P).

•

The ignition is off.

•

All vehicle doors are closed.

•

The driver seatbelt is unbuckled.

1.

Switch the ignition on. Do not start the
engine.

2. Wait until the seatbelt warning light

turns off (about one minute). You must
complete Step 3 within 30 seconds
after the seatbelt warning light turns
off.

3. Buckle then unbuckle the seatbelt

three times at a moderate speed,
ending with the seatbelt in the
unbuckled state. After Step 3, the
seatbelt warning light turns on.

4. While the seatbelt warning light is on,

buckle then unbuckle the seatbelt.
After Step 4, the seatbelt warning light
flashes for confirmation.

•

This will switch the feature off if it is
currently on.

•

This will switch the feature on if it is
currently off.

CHILD RESTRAINT AND
SEATBELT MAINTENANCE

Inspect the vehicle safety belts and child
safety seat systems periodically to make
sure they work properly and are not
damaged. Inspect the vehicle and child
seat safety belts to make sure there are no
nicks, tears or cuts. Replace if necessary.
All vehicle safety belt assemblies, including
retractors, buckles, front safety belt buckle
assemblies, buckle support assemblies
(slide bar-if equipped), shoulder belt
height adjusters (if equipped), shoulder
belt guide on seat back (if equipped), child
safety seat LATCH and tether anchors, and
attaching hardware, should be inspected
after a crash. Read the child restraint
manufacturer's instructions for additional
inspection and maintenance information
specific to the child restraint.

Ford Motor Company recommends that
all safety belt assemblies in use in vehicles
involved in a crash be replaced. However,
if the crash was minor and an authorized
dealer finds that the belts do not show
damage and continue to operate properly,
they do not need to be replaced. Safety
belt assemblies not in use during a crash
should also be inspected and replaced if
either damage or improper operation is
noted.

Properly care for safety belts. See Vehicle
Care (page 360).

42