Ford Super Duty (2017 year). Manual — part 13

E191532

Press the button to release the key blade.
Press and hold the button to fold the key
blade back in when not in use.

E151795

Note: Your vehicle keys came with a
security label that provides important key
cut information. Keep the label in a safe
place for future reference.

Intelligent Access Key

(If Equipped)

E226461

The intelligent access keys operate the
power locks and the remote start system.
The key must be in your vehicle to use the
push button start.

Removable Key Blade

The intelligent access key also contains a
removable key blade that you can use to
unlock your vehicle.

55

E226462

Press the release button and pull the key
blade out.

E151795

Note: Your vehicle keys came with a
security label that provides important key
cut information. Keep the label in a safe
place for future reference.

Replacing the Battery

Note: Refer to local regulations when
disposing of transmitter batteries.

Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.

Note: Replacing the battery does not erase
the programmed key from your vehicle. The
transmitter should operate normally.

A message appears in the information
display when the remote control battery
is low. See General Information (page
111).

Integrated Keyhead Transmitter

The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.

Press the button to release the key blade
before beginning the procedure.

E191533

1.

Insert a suitable tool, for example a
screwdriver, in the position shown and
gently push the clip.

2. Press the clip down to release the

battery cover.

E151799

3. Carefully remove the cover.

56

E151800

Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.

4. Insert a suitable tool, for example a

screwdriver, in the position shown to
release the battery.

E151801

5. Remove the battery.

6. Insert a new battery with the + facing

upward.

7.

Reinstall the battery housing cover
onto the transmitter.

Intelligent Access Key

The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.

E226462

1.

Press the release button and pull the
key blade out.

57

E218401

2. Twist a thin coin under the tab hidden

behind the key blade head to remove
the battery cover.

E218402

3. Insert a suitable tool, for example a

screwdriver, in the position shown and
carefully remove the battery.

4. Insert a new battery with the + facing

upward.

5. Reinstall the battery housing cover

onto the transmitter and install the key
blade.

Memory Feature

(If Equipped)

You can use the remote control to recall
memory positions.

Press the unlock button on a linked remote
control to recall memory positions. If you
enable the easy entry and exit feature, the
seat moves to the easy entry position. The
seat moves to the driver memory position
when you switch the ignition on.

Linking a Preset Position to your
Remote Control

See Memory Function (page 157).

58