Ford Aerostar (1997 year). Manual — part 53
212
If your vehicle is the model with a standard
length body or extended length (all models), the
temporary spare tire is stowed at the rear of the
vehicle under the body.
The standard length E-4WD model spare tire is
mounted on the floor.
To remove underbody temporary spare tire:
1.
Insert lug nut wrench into the actuator hole
and turn counterclockwise until the cable
extends to allow the spare tire to be pulled
rearward from under the vehicle.
2.
Slide the spare tire to the rear and remove
the retainer from the wheel.
3.
To stow cable/retainer with spare tire
removed, insert cable fitting into carrier rear
wall slot, place wheel retainer against the
carrier, and turn lug nut wrench clockwise
until slack is removed.
213
Temporary spare tire location and assembly
To stow underbody temporary spare tire:
1.
Insert lug nut wrench into the actuator hole
and turn counterclockwise until the
cable/retainer is extended for insertion into
the wheel.
2.
Install the retainer through wheel center
with valve stem facing up.
214
3.
Rotate wrench clockwise until tire is secured.
(Raising mechanism will slip.)
4.
Check for proper seating against underbody
supports and retighten if necessary.
Spare tire — underbody carrier
R
WARNING
Do not stow any conventional spare tire
or flat temporary spare tire in the
underbody position. Doing so may cause
damage to the tire, rear axle, or brake
lines. (Standard length only)
A flat tire can be temporarily secured to the
floor pan under the rear-most seat. To
temporarily secure a flat tire:
1.
Remove the spare tire “J” bolt, plate and
wing nut from their stowed location on the
jack.
215
2.
Position the flat tire, valve stem up, under
the rear-most seat and over the “J” bolt
attaching bracket on the floor pan.
3.
Insert the “J” hook bolt through the center of
the wheel and hook on bracket.
4.
Install plate over “J” hook bolt and secure
with wing nut.
A Stowed position of “J” bolt, plate and wing nut
(Standard length model)
Flat tire stowage (Standard length model)
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст