Ford Aerostar (1997 year). Manual — part 24
93
The features on the console
Garage Door Opener Storage
At the center of the console, a compartment is
provided for storage of a garage door opener
transmitter. In its stored position, the transmitter
can be activated by pressing on the compartment
door.
To install the transmitter:
1.
Push down on latch.
2.
Open door by moving hand towards front of
vehicle while maintaining pressure on latch
(Figure 1).
94
3.
Remove the backing from the self-adhesive
side of the Velcro
TM
(supplied with the
console) and apply it to the back of your
transmitter.
4.
Install your transmitter into the
compartment, making sure the actuator
button of your transmitter is in line with one
of the pegs on the door when the door is
closed (Figure 2).
95
5.
Once the transmitter is installed, the
actuation peg on the door in line with your
transmitter button may need to be adjusted
for proper function. This can be done using
the button height adjustment pegs (located
on the compartment door). Add one peg at a
time until pressing the door actuates the
transmitter button (Figure 3).
6.
By properly adjusting the actuation peg
height, you will be able to actuate your
garage door by pressing the door as shown
(Figure 4).
97
Seating and Safety
Restraints
Seats
Adjusting the Front Seat Manually
You can move the driver seat forward or
backward. If your vehicle is equipped with the
optional reclining bucket seat, you can also tilt
the seatback up to 30 degrees rearward.
The front passenger seat cannot be adjusted.
Seat adjustment levers
R
WARNING
Never adjust the driver’s seat or seatback
when the vehicle is moving.
R
WARNING
Do not pile cargo higher than the
seatbacks to avoid injuring people in a
collision or sudden stop.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст