Ford F-250 Super Duty (1999 year). Manual — part 9

Setting the clock

Press CLK to toggle between
listening frequencies and clock
mode.

To set the hour, press and hold the
CLK control and press:

•

to decrease hours and

•

to increase hours.

To set the minute, press and hold
the CLK control and press:

•

to decrease minutes and

•

to increase minutes.

The CLK control will allow you to
switch between media display mode
(radio station, stereo information,
etc.) and clock display mode (time).
When in clock mode, the media
information will display for ten
seconds, when the radio is turned
on, and then revert to clock
information. Anytime that the media is changed, (new radio station,
etc.), the media information will again display for ten seconds before

TONE

CLK

SEEK

SEEK

TUNE

TUNE

TONE

CLK

SEEK

TUNE

SEEK

TUNE

Controls and features

33

reverting back to the clock. In media mode, the media information will
always be displayed.

AM/FM stereo cassette

Volume/power control

Press the control to turn the audio
system on or off.

Turn the control to raise or lower
volume.

SCAN

BASS

TREB

BAL

FADE

SIDE

EJ

REW

FF

1 - 2

TAPE

AMS

VOL - PUSH ON

SEEK

TUNE

AM

FM

CLK

1

2

3

4

5

6

FM1

ST

VOL - PUSH ON

VOL - PUSH ON

Controls and features

34

If the volume is set above a certain level and the ignition is turned off,
the volume will come back on at a “nominal” listening level when the
ignition switch is turned back on.

AM/FM select

The AM/FM select control works in
radio and tape modes.

AM/FM select in radio mode

This control allows you to select AM or FM frequency bands. Press the
AM control to select from AM selections, and press the FM control to
select from FM1 or FM2 memory preset stations.

AM/FM select in tape mode

Press this control to stop tape play and begin radio play.

Tune adjust

The tune control works in radio mode.

Tune adjust in radio mode
• Press

to move to the next

frequency down the band
(whether or not a listenable
station is located there). Hold the
control to move through the
frequencies quickly.

• Press

to move to the next frequency up the band (whether or not

a listenable station is located there). Hold for quick movement.

Seek function

The seek function control works in radio mode.

AM

FM

SEEK

TUNE

Controls and features

35

Seek function in radio mode
• Press

to find the next

listenable station down the
frequency band.

• Press

to find the next

listenable station up the
frequency band.

Scan function

The scan function works in radio
mode.

Scan function in radio mode

Press the SCAN control to hear a brief sampling of all listenable stations
on the frequency band. Press the SCAN control again to stop the scan
mode.

Radio station memory preset

The radio is equipped with six station memory preset controls. These
controls can be used to select up to six preset AM stations and twelve
FM stations (six in FM1 and six in FM2).

Setting memory preset stations

1. Select the frequency band with the AM or the FM select control.

2. Select a station. Refer to Tune adjust or Seek function for more
information on selecting a station.

3. Press and hold a memory preset control until the sound returns,
indicating the station is held in memory on the control you selected.

SEEK

TUNE

SCAN

1

2

3

4

5

6

Controls and features

36