Ford Fiesta (2011 year). Manual — part 141
5.
Equipment: Spherical cutter
•
E113591
6.
General Equipment: Spot weld drill Bit
•
E113592
G1133600en
501-30-
5
Rear End Sheet Metal Repairs
501-30-
5
REMOVAL AND INSTALLATION
201
7.
Equipment: Spherical cutter
•
E113593
8.
General Equipment: Air Body Saw
General Equipment: Spot weld drill Bit
•
E113594
G1133600en
501-30-
6
Rear End Sheet Metal Repairs
501-30-
6
REMOVAL AND INSTALLATION
201
9.
General Equipment: Hot Air Gun
•
E113595
170
Installation
1. NOTE: Before resistance spot welding of body
panels with a total panel thickness of 3 mm and
greater, the manufacturer's welding equipment
instructions and sub-section 501-25 must be
followed.
Refer to: Tools and Equipment for Body Repairs
(501-25 Body Repairs - General Information,
Description and Operation).
2. NOTE: Sealer or adhesive must not be applied
in welding zones. Areas which were bonded or
sealed needs to be thoroughly sealed
afterwards.
Refer to: Sealer, Underbody Protection Material
General Information, Description and
Operation).
G1133600en
501-30-
7
Rear End Sheet Metal Repairs
501-30-
7
REMOVAL AND INSTALLATION
and Adhesives
(501-25 Body Repairs -
201
3.
General Equipment: 6 mm Drill Bit
•
E113729
6 mm
4.
General Equipment: 6 mm Drill Bit
•
E113730
6 mm
G1133600en
501-30-
8
Rear End Sheet Metal Repairs
501-30-
8
REMOVAL AND INSTALLATION
201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст