Ford Fiesta (2011 year). Manual — part 152
E113741
4.
General Equipment: Air Body Saw
•
E113742
G1133603en
501-30-
49
Rear End Sheet Metal Repairs
501-30-
49
REMOVAL AND INSTALLATION
201
5.
General Equipment: Spot weld drill Bit
•
E113743
6.
Do not cut in panel below.
General Equipment: Air Body Saw
•
50 mm
E113744
7.
General Equipment: Hot Air Gun
•
G1133603en
501-30-
50
Rear End Sheet Metal Repairs
501-30-
50
REMOVAL AND INSTALLATION
201
170
E113745
Installation
1. NOTE: Before resistance spot welding of body
panels with a total panel thickness of 3 mm and
greater, the manufacturer's welding equipment
instructions and sub-section 501-25 must be
followed.
Refer to: Tools and Equipment for Body Repairs
(501-25 Body Repairs - General Information,
Description and Operation).
2. NOTE: Sealer or adhesive must not be applied
in welding zones. Areas which were bonded or
sealed needs to be thoroughly sealed
afterwards.
Refer to: Sealer, Underbody Protection Material
and Adhesives
(501-25 Body Repairs -
General Information, Description and
Operation).
G1133603en
501-30-
51
Rear End Sheet Metal Repairs
501-30-
51
REMOVAL AND INSTALLATION
201
3.
Continuous MIG weld seam on C-Pillar.
General Equipment: Metal Inert Gas (MIG)
Welding Equipment
•
E113746
4.
General Equipment: Resistance Spotwelding
Equipment
•
E113747
G1133603en
501-30-
52
Rear End Sheet Metal Repairs
501-30-
52
REMOVAL AND INSTALLATION
201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст